[Sat Aug  4 15:26:48 2012] Detection parameters:
  Position = (179.8, 163.2) = 10 46 14.68 -59 49 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 9.0
  Background counts = 13.3
  Rate = 0.003 +/- 0.0008

[Sat Aug  4 15:26:48 2012] Off-axis axis estimate = 13.05'
[Sat Aug  4 15:33:59 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 15:33:59 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Aug  4 15:33:59 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Sat Aug  4 15:33:59 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.95"
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28.csv
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28.csv
[Sat Aug  4 16:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 16:27:57 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Aug  4 16:27:57 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Aug  4 16:27:57 2012] Fit fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Aug  4 17:34:23 2012] Spatial fit model total counts = 227.983000, observed total counts = 226.000000
[Sat Aug  4 17:34:23 2012] Offset between fit and detection position for source 26 = 0.219163 pixels
[Sat Aug  4 17:34:23 2012] Warning, changing simple spatial fit ID from 28 to 24
[Sat Aug  4 17:34:23 2012] 222.742900 total counts/ 207.159000 bgd. counts: snr = 1.082740
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.219163 pixels
  Position = (180.0, 163.1) = 10 46 14.56 -59 49 10.7
  Extent = 3.3" x 3.3", rotation angle = 0
  Source counts = 15.6 +/- 14.9
  Background counts = 207.2
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability