[Sat Aug  4 15:26:48 2012] Detection parameters:
  Position = (302.7, 275.0) = 10 45 3.78 -59 41 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10633.1 +/- 122.2
  Background counts = 24.6
  Rate = 1 +/- 0.01

[Sat Aug  4 15:26:48 2012] Off-axis axis estimate = 1.72'
[Sat Aug  4 15:33:59 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 15:33:59 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Aug  4 15:33:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sat Aug  4 15:33:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 16:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 16:27:56 2012] Fit fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 17:34:23 2012] Spatial fit model total counts = 11768.800000, observed total counts = 11567.000000
[Sat Aug  4 17:34:23 2012] Offset between fit and detection position for source 2 = 0.044767 pixels
[Sat Aug  4 17:34:23 2012] 11680.420000 total counts/ 4802.700000 bgd. counts: snr = 99.243429
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.044767 pixels
  Position = (302.7, 275.1) = 10 45 3.77 -59 41 5.0
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 6877.7 +/- 108.1
  Background counts = 4802.7
  Rate = 0.6 +/- 0.009
[Sat Aug  4 17:34:23 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:34:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:34:23 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:34:23 2012] Source does appear to be extended
[Sat Aug  4 17:34:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 17:34:24 2012] Source is confused with source 8
[Sat Aug  4 17:35:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 17:35:59 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Sat Aug  4 17:35:59 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.961
[Sat Aug  4 17:35:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.51"
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 18:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 18:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 19:22:56 2012] Warning, spatial fit 1 centroid is now closest to src. 20
[Sat Aug  4 19:22:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 19:22:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 19:22:56 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 19:22:56 2012] Source does appear to be extended
[Sat Aug  4 19:22:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 19:28:18 2012] Counts = 6877.720000, rescaling region sizes by 2.000000
[Sat Aug  4 19:28:18 2012] XMMSAS src. selection expression = ellipse(26286.467000, 23882.160800, 661.084819, 661.084819, 0.000000, X, Y)
[Sat Aug  4 19:28:18 2012] Writing source region out to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug  4 19:28:18 2012] Extracting stamp from image fullrun_mos1_xmm0560580201_pi300-10000_cl_sm2.00.img.gz, (265, 237) - (341, 313)
[Sat Aug  4 19:28:18 2012] XMMSAS bgd. selection expression = annulus(26286.467000, 23882.160800, 2203.616063, 4407.232127, X, Y) && !ellipse(25746.726532, 24030.271332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25939.611755, 25005.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.711700, 24625.552795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25462.266693, 24629.999969, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 19:28:18 2012] Writing fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2.gif
[Sat Aug  4 19:28:21 2012] Mean detx,y = (335.13, -252.91) 
[Sat Aug  4 19:28:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 19:28:49 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 19:28:49 2012] Setting source spectrum file to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 19:28:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug  4 20:41:48 2012] Updating aperture counts using extracted products
[Sat Aug  4 20:41:48 2012] Error reading totcts from fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 20:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:41:48 2012] Using photon index=1.80, rate=0.592, arf fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 20:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:41:48 2012] Updating source flux to 7.1e-12
[Sat Aug  4 20:41:50 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Aug  4 20:42:47 2012] Reading fit data from xmm0560580201/analysis//spectral/fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug  4 20:42:47 2012] Spectral fit parameter nH value = 2.99601e+13
[Sat Aug  4 20:42:47 2012] Spectral fit parameter PhoIndex value = 0.446924
[Sat Aug  4 20:42:47 2012] Failed to get F(0.3-8.0) from xmm0560580201/analysis//spectral/fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 20:42:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:42:47 2012] Using Nh = 3e+13, photon index=0.45, rate=0.592, arf fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 20:42:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:42:47 2012] Updating source flux to 1.3e-11