[Tue Jul  3 06:15:06 2012] Detection parameters:
  Position = (377.1, 239.4) = 10 44 20.05 -59 43 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 10.3
  Background counts = 27.7
  Rate = 0.006 +/- 0.001

[Tue Jul  3 06:15:07 2012] Off-axis axis estimate = 7.13'
[Tue Jul  3 08:12:57 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 08:12:57 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Tue Jul  3 08:12:57 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.735
[Tue Jul  3 08:12:57 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.99"
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 09:41:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:41:03 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul  3 09:41:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul  3 09:41:03 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul  3 09:41:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul  3 09:41:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:41:13 2012] Source 38 is offset by -6.013079 and 6.322309 pixels which is larger than
2 X fitted extent = 1.359853 x 1.359853, not incorporating fit results
[Tue Jul  3 09:41:14 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.529416 pixels away
[Tue Jul  3 09:41:14 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:41:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:41:14 2012] Assessing source extent using major
[Tue Jul  3 09:41:14 2012] Source does appear to be extended
[Tue Jul  3 09:41:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 09:41:14 2012] Deleting source due to low Poisson probability 0.9