[Tue Jul  3 06:15:06 2012] Detection parameters:
  Position = (394.1, 243.7) = 10 44 10.31 -59 43 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2523.1 +/- 70.9
  Background counts = 24.1
  Rate = 0.2 +/- 0.005

[Tue Jul  3 06:15:07 2012] Off-axis axis estimate = 7.99'
[Tue Jul  3 08:12:57 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 08:12:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 08:12:57 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Tue Jul  3 08:12:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.656
[Tue Jul  3 08:12:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.42"
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3.csv
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3.csv
[Tue Jul  3 09:41:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul  3 09:41:02 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul  3 09:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul  3 09:41:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:41:13 2012] Warning, spatial fit 3 centroid is now closest to src. 38
[Tue Jul  3 09:41:14 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:41:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:41:14 2012] Assessing source extent using major
[Tue Jul  3 09:41:14 2012] Source does appear to be extended
[Tue Jul  3 09:41:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 09:41:14 2012] Source is confused with source 6
[Tue Jul  3 10:09:10 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:09:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 10:09:10 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Tue Jul  3 10:09:10 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.656
[Tue Jul  3 10:09:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.42"
[Tue Jul  3 11:32:27 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul  3 11:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3.csv
[Tue Jul  3 11:32:27 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul  3 11:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3.csv
[Tue Jul  3 11:32:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:32:28 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul  3 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul  3 11:32:28 2012] fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul  3 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul  3 11:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:32:39 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.150338 pixels away
[Tue Jul  3 11:32:39 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 11:32:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 11:32:39 2012] Assessing source extent using major
[Tue Jul  3 11:32:39 2012] Source does appear to be extended
[Tue Jul  3 11:32:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 12:59:48 2012] Counts = 2523.112061, rescaling region sizes by 2.000000
[Tue Jul  3 12:59:48 2012] XMMSAS src. selection expression = ellipse(34235.465851, 21153.991806, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jul  3 12:59:48 2012] Writing source region out to fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  3 12:59:48 2012] Extracting stamp from image fullrun_mos2_xmm0560580101_pi300-10000_cl_sm2.00.img.gz, (319, 169) - (469, 319)
[Tue Jul  3 12:59:48 2012] XMMSAS bgd. selection expression = annulus(34235.465851, 21153.991806, 4350.000000, 8700.000000, X, Y) && !ellipse(26182.378800, 23880.966200, 1391.851240, 1391.851240, 0.000000, X, Y) && !ellipse(30702.421400, 20057.420200, 374.316811, 374.316811, 0.000000, X, Y) && !ellipse(25831.347800, 25044.323200, 344.126410, 344.126410, 0.000000, X, Y) && !ellipse(25722.310883, 20661.811768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34385.655548, 21547.963638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25458.554962, 17843.272491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.917511, 23381.456512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29466.651000, 16820.956800, 493.295214, 493.295214, 0.000000, X, Y) && !ellipse(27006.591034, 17426.682465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31813.922485, 19796.093002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.071289, 25364.553650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28611.593414, 20544.742233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.054413, 22260.909363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.711600, 28050.154400, 591.404017, 591.404017, 0.000000, X, Y) && !ellipse(36196.837077, 13570.076914, 2687.951878, 636.592727, 136.738899, X, Y)
[Tue Jul  3 12:59:48 2012] Writing fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1.gif
[Tue Jul  3 13:04:53 2012] Mean detx,y = (4474.08, 7301.15) 
[Tue Jul  3 13:04:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 13:06:41 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 13:06:41 2012] Setting source spectrum file to fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 13:06:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  3 13:18:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 13:18:37 2012] rmf not generated due to insufficient counts
[Tue Jul  3 13:49:32 2012] Updating aperture counts using extracted products
[Tue Jul  3 13:49:32 2012] Error reading totcts from fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 13:49:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 13:49:33 2012] Using photon index=1.80, rate=0.177, arf fullrun_mos2_xmm0560580101_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 13:49:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 13:49:33 2012] Updating source flux to 3.6e-12
[Tue Jul  3 13:50:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting