[Tue Jul  3 06:14:46 2012] Detection parameters:
  Position = (244.0, 176.8) = 10 45 36.71 -59 48 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 13.4
  Background counts = 30.6
  Rate = 0.008 +/- 0.001

[Tue Jul  3 06:14:46 2012] Off-axis axis estimate = 9.66'
[Tue Jul  3 07:26:11 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 07:26:11 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Tue Jul  3 07:26:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Tue Jul  3 07:26:11 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.26"
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11.csv
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11.csv
[Tue Jul  3 08:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul  3 08:12:57 2012] Fit fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jul  3 09:41:08 2012] Warning, spatial fit 11 centroid is now closest to src. 27
[Tue Jul  3 09:41:08 2012] Spatial fit model total counts = 480.093000, observed total counts = 480.000000
[Tue Jul  3 09:41:08 2012] Offset between fit and detection position for source 28 = 3.562396 pixels
[Tue Jul  3 09:41:08 2012] Warning, changing simple spatial fit ID from 11 to 15
[Tue Jul  3 09:41:08 2012] 475.911600 total counts/ 448.500000 bgd. counts: snr = 1.294354
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 3.562396 pixels
  Position = (247.5, 176.6) = 10 45 34.66 -59 48 11.8
  Extent = 8.3 (5.5-11.3)", rotation angle = 0
  Source counts = 27.4 +/- 21.8
  Background counts = 448.5
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability