[Tue Jul  3 06:14:46 2012] Detection parameters:
  Position = (312.3, 90.4) = 10 44 57.27 -59 54 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.9 +/- 11.5
  Background counts = 18.9
  Rate = 0.006 +/- 0.0008

[Tue Jul  3 06:14:46 2012] Off-axis axis estimate = 15.11'
[Tue Jul  3 07:26:11 2012] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 07:26:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 07:26:11 2012] Initial guess for spatial extent in simple fitting = 13.98"
[Tue Jul  3 07:26:11 2012] source mask rpix=3.2, npix_max = 55, mask sum = 28, frac = 0.507
[Tue Jul  3 07:26:11 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.98"
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 08:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul  3 08:12:57 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jul  3 08:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul  3 08:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:41:08 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 17.389346 pixels away
[Tue Jul  3 09:41:08 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:41:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:41:08 2012] Assessing source extent using major
[Tue Jul  3 09:41:08 2012] Source does appear to be extended
[Tue Jul  3 09:41:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 09:44:14 2012] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 09:44:14 2012] Initial guess for spatial extent in simple fitting = 13.98"
[Tue Jul  3 09:44:14 2012] source mask rpix=3.2, npix_max = 55, mask sum = 28, frac = 0.507
[Tue Jul  3 09:44:14 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.98"
[Tue Jul  3 10:09:09 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jul  3 10:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10.csv
[Tue Jul  3 10:09:09 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jul  3 10:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10.csv
[Tue Jul  3 10:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 10:09:10 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jul  3 10:09:10 2012] fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jul  3 10:09:10 2012] Fit fullrun_mos1_xmm0560580101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jul  3 11:32:32 2012] Spatial fit model total counts = 306.908000, observed total counts = 284.000000
[Tue Jul  3 11:32:32 2012] Offset between fit and detection position for source 23 = 3.124279 pixels
[Tue Jul  3 11:32:32 2012] 267.980540 total counts/ 1.208540 bgd. counts: snr = 242.666446
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.124279 pixels
  Position = (309.7, 92.1) = 10 44 58.80 -59 54 19.4
  Extent = 10.4 (10.4-10.4)", rotation angle = 0
  Source counts = 266.8 +/- 16.4
  Background counts = 1.2
  Rate = 0.02 +/- 0.001
[Tue Jul  3 11:32:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 11:32:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 11:32:32 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 11:32:32 2012] Source does appear to be extended
[Tue Jul  3 11:32:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 12:07:26 2012] XMMSAS src. selection expression = ellipse(26894.702000, 7965.485200, 626.138796, 626.138796, 0.000000, X, Y)
[Tue Jul  3 12:07:26 2012] Writing source region out to fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23_src.reg
[Tue Jul  3 12:07:26 2012] Extracting stamp from image fullrun_mos1_xmm0560580101_pi300-10000_cl_sm2.00.img.gz, (274, 56) - (346, 128)
[Tue Jul  3 12:07:26 2012] XMMSAS bgd. selection expression = annulus(26894.702000, 7965.485200, 1043.564661, 2087.129321, X, Y)
[Tue Jul  3 12:07:26 2012] Writing fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23.gif
[Tue Jul  3 12:15:33 2012] Mean detx,y = (12786.10, 9633.49) 
[Tue Jul  3 12:15:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 12:15:48 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 12:15:48 2012] Setting source spectrum file to fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jul  3 12:15:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Jul  3 13:49:32 2012] Updating aperture counts using extracted products
[Tue Jul  3 13:49:32 2012] Error reading totcts from fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jul  3 13:49:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 13:49:32 2012] Using photon index=1.80, rate=0.0188, arf fullrun_mos1_xmm0560580101_pi300-10000_pass1_cl_src23.arf
[Tue Jul  3 13:49:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 13:49:32 2012] Updating source flux to 5.8e-13