[Sat Mar 31 11:01:14 2012] Detection parameters:
  Position = (280.5, 301.4) = 4 55 51.12 54 40 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.2 +/- 15.6
  Background counts = 88.0
  Rate = 0.005 +/- 0.0007

[Sat Mar 31 11:01:14 2012] Off-axis axis estimate = 1.32'
[Sat Mar 31 11:23:23 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 11:23:23 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sat Mar 31 11:23:23 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.827
[Sat Mar 31 11:23:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.09"
[Sat Mar 31 11:33:11 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4.ximg exists
[Sat Mar 31 11:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4.csv
[Sat Mar 31 11:33:11 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Mar 31 11:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4.csv
[Sat Mar 31 11:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 11:33:11 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Mar 31 11:33:11 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Mar 31 11:33:11 2012] Fit fullrun_mos2_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Mar 31 11:33:19 2012] Spatial fit model total counts = 226.922000, observed total counts = 210.000000
[Sat Mar 31 11:33:19 2012] Offset between fit and detection position for source 4 = 0.349003 pixels
[Sat Mar 31 11:33:19 2012] 228.248900 total counts/ 193.228000 bgd. counts: snr = 2.519372
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.349003 pixels
  Position = (280.8, 301.5) = 4 55 50.95 54 40 55.2
  Extent = 3.9 (2.8-6.0)", rotation angle = 0
  Source counts = 35.0 +/- 15.1
  Background counts = 193.2
  Rate = 0.002 +/- 0.001
[Sat Mar 31 11:33:19 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 11:33:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 11:33:19 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 11:33:19 2012] Source does appear to be extended
[Sat Mar 31 11:33:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 12:13:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 31 12:13:18 2012] Initial guess for spatial extent in simple fitting = 3.89"
[Sat Mar 31 12:13:18 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.771
[Sat Mar 31 12:13:18 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 3.89"
[Sat Mar 31 12:26:39 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4.ximg exists
[Sat Mar 31 12:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4.csv
[Sat Mar 31 12:26:39 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Mar 31 12:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4.csv
[Sat Mar 31 12:26:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 12:26:39 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Mar 31 12:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Mar 31 12:26:39 2012] fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Mar 31 12:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Mar 31 12:26:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 12:26:46 2012] Spatial fit model total counts = 238.364000, observed total counts = 209.000000
[Sat Mar 31 12:26:46 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 31 12:26:46 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 12:26:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 12:26:46 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 12:26:46 2012] Source does appear to be extended
[Sat Mar 31 12:26:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 12:33:27 2012] XMMSAS src. selection expression = ellipse(24383.702800, 26184.855000, 233.610007, 233.610007, 0.000000, X, Y)
[Sat Mar 31 12:33:27 2012] Writing source region out to fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4_src.reg
[Sat Mar 31 12:33:27 2012] Extracting stamp from image fullrun_mos2_xmm0560192501_pi300-10000_cl_sm2.00.img.gz, (267, 288) - (294, 315)
[Sat Mar 31 12:33:27 2012] XMMSAS bgd. selection expression = annulus(24383.702800, 26184.855000, 389.350011, 778.700022, X, Y) && !ellipse(24925.937500, 24548.044525, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 12:33:27 2012] Writing fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4.gif
[Sat Mar 31 12:34:48 2012] Mean detx,y = (-304.35, -2063.06) 
[Sat Mar 31 12:34:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 12:35:04 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 12:35:05 2012] Setting source spectrum file to fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 31 12:35:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Mar 31 12:36:12 2012] Not generating rmf since there are only 35 counts
[Sat Mar 31 12:36:12 2012] rmf not generated due to insufficient counts
[Sat Mar 31 12:37:29 2012] Updating aperture counts using extracted products
[Sat Mar 31 12:37:30 2012] Error reading totcts from fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 31 12:37:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 12:37:30 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4.arf
[Sat Mar 31 12:37:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 12:37:30 2012] Updating source flux to 3.3e-14
[Sat Mar 31 12:37:32 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Sat Mar 31 12:37:32 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Mar 31 12:37:33 2012] xmm0560192501/analysis//spectral/fullrun_mos2_xmm0560192501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete