[Sat Mar 31 11:00:39 2012] Detection parameters:
  Position = (287.2, 282.7) = 4 55 47.77 54 39 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.9 +/- 22.7
  Background counts = 79.3
  Rate = 0.009 +/- 0.0009

[Sat Mar 31 11:00:39 2012] Off-axis axis estimate = 1.40'
[Sat Mar 31 11:13:37 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 11:13:37 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Mar 31 11:13:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Sat Mar 31 11:13:37 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.13"
[Sat Mar 31 11:23:23 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2.ximg exists
[Sat Mar 31 11:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2.csv
[Sat Mar 31 11:23:23 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Mar 31 11:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2.csv
[Sat Mar 31 11:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 11:23:23 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Mar 31 11:23:23 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Mar 31 11:23:23 2012] Fit fullrun_mos1_xmm0560192501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Mar 31 11:33:16 2012] Source 2 is offset by -6.319720 and 3.522555 pixels which is larger than
2 X fitted extent = 0.819660 x 0.819660, not incorporating fit results
[Sat Mar 31 11:33:16 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 11:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 11:33:16 2012] Assessing source extent using major
[Sat Mar 31 11:33:16 2012] Source does appear to be extended
[Sat Mar 31 11:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:44:12 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 11:44:12 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Mar 31 11:44:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Sat Mar 31 11:44:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.13"
[Sat Mar 31 12:13:18 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 31 12:13:18 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 31 12:13:18 2012] Fit fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Mar 31 12:13:18 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 31 12:13:18 2012] fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 31 12:13:18 2012] Fit fullrun_mos1_xmm0560192501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Mar 31 12:26:44 2012] Source 2 is offset by -5.346180 and 3.547267 pixels which is larger than
2 X fitted extent = 0.824242 x 0.824242, not incorporating fit results
[Sat Mar 31 12:26:44 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 12:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 12:26:44 2012] Assessing source extent using major
[Sat Mar 31 12:26:44 2012] Source does appear to be extended
[Sat Mar 31 12:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 12:30:15 2012] XMMSAS src. selection expression = ellipse(24934.866364, 24544.152252, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 12:30:15 2012] Writing source region out to fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 31 12:30:15 2012] Extracting stamp from image fullrun_mos1_xmm0560192501_pi300-10000_cl_sm2.00.img.gz, (250, 245) - (325, 320)
[Sat Mar 31 12:30:15 2012] XMMSAS bgd. selection expression = annulus(24934.866364, 24544.152252, 1087.500000, 2175.000000, X, Y)
[Sat Mar 31 12:30:15 2012] Writing fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2.gif
[Sat Mar 31 12:30:40 2012] Mean detx,y = (-175.76, -232.70) 
[Sat Mar 31 12:30:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 12:30:58 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 12:30:59 2012] Setting source spectrum file to fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 12:30:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 31 12:32:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 12:32:30 2012] rmf not generated due to insufficient counts
[Sat Mar 31 12:37:29 2012] Updating aperture counts using extracted products
[Sat Mar 31 12:37:29 2012] Error reading totcts from fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 12:37:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 12:37:29 2012] Using photon index=1.80, rate=0.00917, arf fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 12:37:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 12:37:29 2012] Updating source flux to 9.1e-14
[Sat Mar 31 12:37:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Mar 31 12:37:32 2012] xmm0560192501/analysis//spectral/fullrun_mos1_xmm0560192501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete