[Thu Jun 13 12:34:40 2013] Detection parameters:
  Position = (228.8, 322.4) = 17 34 28.01 49 14 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.1 +/- 31.1
  Background counts = 98.1
  Rate = 0.01 +/- 0.0008

[Thu Jun 13 12:34:40 2013] Off-axis axis estimate = 5.34'
[Thu Jun 13 12:37:11 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 12:37:11 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Thu Jun 13 12:37:11 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.745
[Thu Jun 13 12:37:11 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.10"
[Thu Jun 13 13:28:05 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun 13 13:28:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30.csv
[Thu Jun 13 13:28:05 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun 13 13:28:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30.csv
[Thu Jun 13 13:28:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:28:06 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun 13 13:28:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 13 13:28:06 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun 13 13:28:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 13 13:28:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:31:05 2013] Source 31 is offset by 0.236348 and 1.759366 pixels which is larger than
2 X fitted extent = 1.548460 x 1.548460, not incorporating fit results
[Thu Jun 13 14:31:05 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:31:05 2013] Assessing source extent using major
[Thu Jun 13 14:31:05 2013] Source does appear to be extended
[Thu Jun 13 14:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 14:31:25 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:31:25 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Thu Jun 13 14:31:25 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.745
[Thu Jun 13 14:31:25 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.10"
[Thu Jun 13 15:23:46 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun 13 15:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29.csv
[Thu Jun 13 15:23:46 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun 13 15:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29.csv
[Thu Jun 13 15:23:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:23:47 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 13 15:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Jun 13 15:23:47 2013] fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 13 15:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Jun 13 15:23:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:21:59 2013] Source 31 is offset by 0.513520 and 2.892217 pixels which is larger than
2 X fitted extent = 1.480561 x 2.481435, not incorporating fit results
[Thu Jun 13 16:21:59 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:21:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:21:59 2013] Assessing source extent using major
[Thu Jun 13 16:21:59 2013] Source does appear to be extended
[Thu Jun 13 16:21:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:22:19 2013] XMMSAS src. selection expression = ellipse(19858.876480, 27997.248840, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:22:19 2013] Writing source region out to fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 13 16:22:19 2013] Extracting stamp from image fullrun_pn_xmm0560192401_pi300-10000_cl_sm2.00.img.gz, (191, 285) - (266, 360)
[Thu Jun 13 16:22:19 2013] XMMSAS bgd. selection expression = annulus(19858.876480, 27997.248840, 1087.500000, 2175.000000, X, Y) && !ellipse(22111.420800, 28350.117400, 305.491209, 305.491209, 0.000000, X, Y)
[Thu Jun 13 16:22:19 2013] Writing fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31.gif
[Thu Jun 13 16:41:04 2013] Mean detx,y = (1012.03, -4611.54) 
[Thu Jun 13 16:41:07 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:41:20 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:41:21 2013] Setting source spectrum file to fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 13 16:41:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 13 17:08:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:08:18 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:54:15 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:54:15 2013] Total counts from fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 599.00
[Thu Jun 13 17:54:15 2013] Total counts from fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 4008.00
[Thu Jun 13 17:54:15 2013] Got source and background scale factors 1072920.000000, 10397581.000000
[Thu Jun 13 17:54:15 2013] User source parameters:
  Position = (228.8, 322.4) = 17 34 28.01 49 14 7.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 185.4 +/- 25.5
  Background aperture counts = 413.6
  Rate = 0.006 +/- 0.0008

[Thu Jun 13 17:54:15 2013] Updating counts from extracted products
[Thu Jun 13 17:54:15 2013] Set source signif. to 185.42/20.34 = 9.12
[Thu Jun 13 17:54:18 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:54:18 2013] Using photon index=1.80, rate=0.00565, arf fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31.arf
[Thu Jun 13 17:54:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:54:18 2013] Updating source flux to 2.2e-14
[Thu Jun 13 17:54:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:54:34 2013] xmm0560192401/analysis//spectral/fullrun_pn_xmm0560192401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete