[Thu Jun 13 12:35:14 2013] Detection parameters:
  Position = (142.3, 190.1) = 17 35 6.20 49 4 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.0 +/- 11.4
  Background counts = 18.4
  Rate = 0.001 +/- 0.0003

[Thu Jun 13 12:35:14 2013] Off-axis axis estimate = 13.78'
[Thu Jun 13 13:58:01 2013] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:58:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 13:58:01 2013] Initial guess for spatial extent in simple fitting = 13.32"
[Thu Jun 13 13:58:01 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.104
[Thu Jun 13 13:58:01 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 13.32"
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27.csv
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27.csv
[Thu Jun 13 14:30:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jun 13 14:30:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:31:14 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.097406 pixels away
[Thu Jun 13 14:31:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:31:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:31:14 2013] Assessing source extent using major
[Thu Jun 13 14:31:14 2013] Source does appear to be extended
[Thu Jun 13 14:31:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:47:49 2013] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:47:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 15:47:49 2013] Initial guess for spatial extent in simple fitting = 13.32"
[Thu Jun 13 15:47:49 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.104
[Thu Jun 13 15:47:49 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.32"
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jun 13 16:21:51 2013] Fit fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src27 appears to have run properly
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jun 13 16:21:51 2013] Fit fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jun 13 16:22:08 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 17.520573 pixels away
[Thu Jun 13 16:22:08 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:22:08 2013] Assessing source extent using major
[Thu Jun 13 16:22:08 2013] Source does appear to be extended
[Thu Jun 13 16:22:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:27:02 2013] XMMSAS src. selection expression = ellipse(12335.034546, 16486.747665, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:27:02 2013] Writing source region out to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_src.reg
[Thu Jun 13 17:27:02 2013] Extracting stamp from image fullrun_mos2_xmm0560192401_pi300-10000_cl_sm2.00.img.gz, (105, 153) - (180, 228)
[Thu Jun 13 17:27:02 2013] XMMSAS bgd. selection expression = annulus(12335.034546, 16486.747665, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 17:27:02 2013] Writing fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25.gif
[Thu Jun 13 17:33:06 2013] Mean detx,y = (10812.30, 11764.41) 
[Thu Jun 13 17:33:06 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:33:15 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:33:15 2013] Setting source spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jun 13 17:33:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Jun 13 17:52:54 2013] Not generating rmf since there are only 58 counts
[Thu Jun 13 17:52:54 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:54:23 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:54:23 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 139.00
[Thu Jun 13 17:54:23 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 574.00
[Thu Jun 13 17:54:24 2013] Got source and background scale factors 1248396.000000, 7021504.000000
[Thu Jun 13 17:54:24 2013] User source parameters:
  Position = (142.3, 190.1) = 17 35 6.20 49 4 46.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 36.9 +/- 12.8
  Background aperture counts = 102.1
  Rate = 0.0009 +/- 0.0003

[Thu Jun 13 17:54:24 2013] Updating counts from extracted products
[Thu Jun 13 17:54:24 2013] Set source signif. to 36.95/10.10 = 3.66
[Thu Jun 13 17:54:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:54:24 2013] Using photon index=1.80, rate=0.000945, arf fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25.arf
[Thu Jun 13 17:54:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:54:24 2013] Updating source flux to 3.4e-14
[Thu Jun 13 17:54:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:54:30 2013] xmm0560192401/analysis//spectral/fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete