[Thu Jun 13 12:35:14 2013] Detection parameters:
  Position = (267.4, 405.3) = 17 34 10.91 49 20 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.6 +/- 15.7
  Background counts = 27.4
  Rate = 0.005 +/- 0.0006

[Thu Jun 13 12:35:14 2013] Off-axis axis estimate = 8.07'
[Thu Jun 13 13:58:01 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:58:01 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Thu Jun 13 13:58:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Thu Jun 13 13:58:01 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.46"
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 14:30:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 14:30:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:31:14 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.839382 pixels away
[Thu Jun 13 14:31:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:31:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:31:14 2013] Assessing source extent using major
[Thu Jun 13 14:31:14 2013] Source does appear to be extended
[Thu Jun 13 14:31:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:47:49 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:47:49 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Thu Jun 13 15:47:49 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Thu Jun 13 15:47:49 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.46"
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 13 16:21:51 2013] Fit fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 13 16:21:51 2013] Fit fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jun 13 16:22:08 2013] Spatial fit model total counts = 313.575000, observed total counts = 292.000000
[Thu Jun 13 16:22:08 2013] Offset between fit and detection position for source 13 = 0.252381 pixels
[Thu Jun 13 16:22:08 2013] 313.149000 total counts/ 220.625000 bgd. counts: snr = 6.229125
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.252381 pixels
  Position = (267.3, 405.6) = 17 34 10.95 49 20 22.1
  Extent = 5.3 (4.2-6.7)", rotation angle = 0
  Source counts = 92.5 +/- 17.7
  Background counts = 220.6
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 16:22:08 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:22:08 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:22:08 2013] Source does appear to be extended
[Thu Jun 13 16:22:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:27:02 2013] XMMSAS src. selection expression = ellipse(23206.913400, 35234.855600, 320.761809, 320.761809, 0.000000, X, Y)
[Thu Jun 13 17:27:02 2013] Writing source region out to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 13 17:27:02 2013] Extracting stamp from image fullrun_mos2_xmm0560192401_pi300-10000_cl_sm2.00.img.gz, (249, 387) - (286, 424)
[Thu Jun 13 17:27:02 2013] XMMSAS bgd. selection expression = annulus(23206.913400, 35234.855600, 534.603015, 1069.206031, X, Y)
[Thu Jun 13 17:27:02 2013] Writing fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13.gif
[Thu Jun 13 17:28:57 2013] Mean detx,y = (-8083.67, 1215.53) 
[Thu Jun 13 17:28:57 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:29:02 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:29:02 2013] Setting source spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 13 17:29:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 13 17:48:22 2013] Not generating rmf since there are only 92 counts
[Thu Jun 13 17:48:22 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:54:22 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:54:22 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 133.00
[Thu Jun 13 17:54:22 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 263.00
[Thu Jun 13 17:54:22 2013] Got source and background scale factors 323200.000000, 2363264.000000
[Thu Jun 13 17:54:22 2013] User source parameters:
  Position = (267.3, 405.6) = 17 34 10.95 49 20 22.1
  Extent = 5.3 (4.2-6.7)", rotation angle = 0
  Source aperture counts = 97.0 +/- 12.6
  Background aperture counts = 36.0
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 17:54:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:54:24 2013] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13.arf
[Thu Jun 13 17:54:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:54:24 2013] Updating source flux to 4.4e-14
[Thu Jun 13 17:54:27 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:54:30 2013] xmm0560192401/analysis//spectral/fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete