[Thu Jun 13 12:35:14 2013] Detection parameters:
  Position = (292.3, 314.4) = 17 33 59.79 49 13 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1955.0 +/- 59.2
  Background counts = 29.6
  Rate = 0.07 +/- 0.002

[Thu Jun 13 12:35:14 2013] Off-axis axis estimate = 1.24'
[Thu Jun 13 13:58:01 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:58:01 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Thu Jun 13 13:58:01 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Thu Jun 13 13:58:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.05"
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 14:30:57 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 14:30:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 14:30:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 14:30:58 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 14:30:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 14:30:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:31:14 2013] Source 1 is offset by 6.827833 and -7.100110 pixels which is larger than
2 X fitted extent = 0.810028 x 0.810028, not incorporating fit results
[Thu Jun 13 14:31:14 2013] Spatial fit model total counts = 2106.570000, observed total counts = 1894.000000
[Thu Jun 13 14:31:14 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 14:31:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:31:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:31:14 2013] Assessing source extent using major
[Thu Jun 13 14:31:14 2013] Source does appear to be extended
[Thu Jun 13 14:31:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:47:49 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:47:49 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Thu Jun 13 15:47:49 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Thu Jun 13 15:47:49 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.05"
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 13 16:21:51 2013] Fit fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 13 16:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 16:21:51 2013] fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 13 16:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 16:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560192401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:22:08 2013] Spatial fit model total counts = 1928.070000, observed total counts = 2064.000000
[Thu Jun 13 16:22:08 2013] Offset between fit and detection position for source 1 = 2.725723 pixels
[Thu Jun 13 16:22:08 2013] 1968.689000 total counts/ 895.379000 bgd. counts: snr = 35.869203
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.725723 pixels
  Position = (292.0, 317.1) = 17 33 59.93 49 13 57.3
  Extent = 7.7 (7.0-8.5)" x 4.1 (3.5-4.8)", rotation angle = 76 (64-102) degrees
  Source counts = 1073.3 +/- 44.4
  Background counts = 895.4
  Rate = 0.03 +/- 0.001
[Thu Jun 13 16:22:08 2013] Spatial fit model total counts = 2119.450000, observed total counts = 1894.000000
[Thu Jun 13 16:22:08 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 16:22:08 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:22:08 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:22:08 2013] Source does appear to be extended
[Thu Jun 13 16:22:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.46
[Thu Jun 13 16:22:08 2013] Source is confused with source 22
[Thu Jun 13 17:27:02 2013] Counts = 1073.310000, rescaling region sizes by 2.000000
[Thu Jun 13 17:27:02 2013] XMMSAS src. selection expression = ellipse(25358.274560, 27538.110000, 920.870426, 491.505614, 75.775600, X, Y)
[Thu Jun 13 17:27:02 2013] Writing source region out to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 13 17:27:02 2013] Extracting stamp from image fullrun_mos2_xmm0560192401_pi300-10000_cl_sm2.00.img.gz, (239, 264) - (345, 370)
[Thu Jun 13 17:27:02 2013] XMMSAS bgd. selection expression = annulus(25358.274560, 27538.110000, 3069.568088, 6139.136177, X, Y) && !ellipse(19140.250800, 21875.557000, 376.821611, 376.821611, 0.000000, X, Y) && !ellipse(31310.733368, 30641.618195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25672.733521, 28022.553925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29279.049800, 29967.116600, 372.982411, 372.982411, 0.000000, X, Y) && !ellipse(31717.053741, 34101.689545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.496520, 28353.922200, 520.224171, 520.224171, 0.000000, X, Y) && !ellipse(22633.314392, 23933.089294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25586.267181, 34468.553528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27061.717400, 31364.702400, 345.896810, 345.896810, 0.000000, X, Y) && !ellipse(30474.354004, 23276.803223, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:27:02 2013] Writing fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 13 17:27:06 2013] Mean detx,y = (-428.88, -1067.40) 
[Thu Jun 13 17:27:07 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:27:27 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:27:27 2013] Setting source spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 13 17:27:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 17:54:21 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:54:21 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1966.00
[Thu Jun 13 17:54:21 2013] Total counts from fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9434.00
[Thu Jun 13 17:54:21 2013] Got source and background scale factors 1267856.000000, 81328064.000000
[Thu Jun 13 17:54:21 2013] User source parameters:
  Position = (292.0, 317.1) = 17 33 59.93 49 13 57.3
  Extent = 7.7 (7.0-8.5)" x 4.1 (3.5-4.8)", rotation angle = 76 (64-102) degrees
  Source aperture counts = 1818.9 +/- 45.3
  Background aperture counts = 147.1
  Rate = 0.05 +/- 0.001

[Thu Jun 13 17:54:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:54:24 2013] Using photon index=1.80, rate=0.0274, arf fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 17:54:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:54:24 2013] Updating source flux to 3.3e-13
[Thu Jun 13 17:54:27 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:54:27 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:54:27 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:54:30 2013] xmm0560192401/analysis//spectral/fullrun_mos2_xmm0560192401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete