[Sun Jun 30 23:55:18 2013] Detection parameters:
  Position = (446.9, 307.1) = 19 18 4.49 60 43 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.4 +/- 13.3
  Background counts = 25.7
  Rate = 0.005 +/- 0.0006

[Sun Jun 30 23:55:19 2013] Off-axis axis estimate = 10.78'
[Sun Jun 30 23:55:34 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:34 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jun 30 23:55:34 2013] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.580
[Sun Jun 30 23:55:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.82"
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3.csv
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3.csv
[Sun Jun 30 23:55:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 30 23:55:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:41 2013] Spatial fit model total counts = 510.387000, observed total counts = 300.000000
[Sun Jun 30 23:55:41 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:55:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:41 2013] Assessing source extent using major
[Sun Jun 30 23:55:41 2013] Source does appear to be extended
[Sun Jun 30 23:55:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:53 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:53 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jun 30 23:55:53 2013] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.580
[Sun Jun 30 23:55:53 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.82"
[Sun Jun 30 23:55:53 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 30 23:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3.csv
[Sun Jun 30 23:55:53 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 30 23:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3.csv
[Sun Jun 30 23:55:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:00 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.816030 pixels away
[Sun Jun 30 23:56:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:00 2013] Assessing source extent using major
[Sun Jun 30 23:56:00 2013] Source does appear to be extended
[Sun Jun 30 23:56:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:56:12 2013] XMMSAS src. selection expression = ellipse(38832.155243, 26670.915680, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Not overwriting source region fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 30 23:56:12 2013] Extracting stamp from image fullrun_pn_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (409, 270) - (484, 345)
[Sun Jun 30 23:56:12 2013] XMMSAS bgd. selection expression = annulus(38832.155243, 26670.915680, 1087.500000, 2175.000000, X, Y) && !ellipse(37691.865295, 29659.323730, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Writing fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3.gif
[Sun Jun 30 23:56:12 2013] ../../xmm0560191901/products/events/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0560191901/products/events/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Jun 30 23:56:12 2013] Mean detx,y = (-45.15, 14168.12) 
[Sun Jun 30 23:56:12 2013] ../../xmm0560191901/products/images/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src.img and ../../xmm0560191901/products/images/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Jun 30 23:56:12 2013] ../../xmm0560191901/products/spectra/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0560191901/products/spectra/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Jun 30 23:56:12 2013] Setting source spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 30 23:56:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 30 23:56:12 2013] ../../xmm0560191901/products/lightcurves/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0560191901/products/lightcurves/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Jul  1 00:04:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul  1 00:04:49 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:33 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:33 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 211.00
[Mon Jul  1 00:27:33 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 833.00
[Mon Jul  1 00:27:33 2013] Got source and background scale factors 339687.000000, 3732272.000000
[Mon Jul  1 00:27:33 2013] User source parameters:
  Position = (446.9, 307.1) = 19 18 4.49 60 43 9.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 135.2 +/- 15.6
  Background aperture counts = 75.8
  Rate = 0.006 +/- 0.0007

[Mon Jul  1 00:27:33 2013] Updating counts from extracted products
[Mon Jul  1 00:27:33 2013] Set source signif. to 135.19/8.71 = 15.53
[Mon Jul  1 00:27:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:36 2013] Using photon index=1.80, rate=0.00638, arf fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3.arf
[Mon Jul  1 00:27:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:36 2013] Updating source flux to 1.2e-13
[Mon Jul  1 00:27:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:46 2013] xmm0560191901/analysis//spectral/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete