[Sun Jun 30 23:55:19 2013] Detection parameters:
  Position = (371.9, 217.8) = 19 18 49.13 60 36 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.2 +/- 14.4
  Background counts = 31.6
  Rate = 0.005 +/- 0.0007

[Sun Jun 30 23:55:19 2013] Off-axis axis estimate = 7.90'
[Sun Jun 30 23:55:34 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:34 2013] Initial guess for spatial extent in simple fitting = 10.38"
[Sun Jun 30 23:55:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.960
[Sun Jun 30 23:55:34 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.38"
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jun 30 23:55:34 2013] Fit fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src29 appears to have run properly
[Sun Jun 30 23:55:35 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Jun 30 23:55:35 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Jun 30 23:55:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:41 2013] Source 29 is offset by -4.832197 and -0.847944 pixels which is larger than
2 X fitted extent = 1.211044 x 1.211044, not incorporating fit results
[Sun Jun 30 23:55:41 2013] Spatial fit model total counts = 437.666000, observed total counts = 413.000000
[Sun Jun 30 23:55:41 2013] Offset between fit and detection position for source 29 = 1.179324 pixels
[Sun Jun 30 23:55:41 2013] 429.001000 total counts/ 350.344000 bgd. counts: snr = 4.202329
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.179324 pixels
  Position = (372.1, 216.7) = 19 18 49.00 60 36 37.1
  Extent = 6.1" x 6.1", rotation angle = 0
  Source counts = 78.7 +/- 20.7
  Background counts = 350.3
  Rate = 0.004 +/- 0.001
[Sun Jun 30 23:55:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:41 2013] Assessing source extent using major
[Sun Jun 30 23:55:41 2013] Source does appear to be extended
[Sun Jun 30 23:55:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:53 2013] Initial guess for spatial extent in simple fitting = 6.13"
[Sun Jun 30 23:55:53 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.098
[Sun Jun 30 23:55:53 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 6.13"
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28.csv
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:00 2013] Warning, spatial fit 28 centroid is now closest to src. 6
[Sun Jun 30 23:56:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:00 2013] Assessing source extent using major
[Sun Jun 30 23:56:00 2013] Source does appear to be extended
[Sun Jun 30 23:56:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:56:12 2013] XMMSAS src. selection expression = ellipse(32322.441540, 18802.877000, 367.555211, 367.555211, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Not overwriting source region fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_src.reg
[Sun Jun 30 23:56:12 2013] Extracting stamp from image fullrun_pn_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (351, 196) - (393, 238)
[Sun Jun 30 23:56:12 2013] XMMSAS bgd. selection expression = annulus(32322.441540, 18802.877000, 612.592018, 1225.184035, X, Y) && !ellipse(31878.336151, 18065.294006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33792.203400, 19525.965012, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Writing fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29.gif
[Mon Jul  1 00:00:31 2013] Mean detx,y = (-8031.41, 7991.72) 
[Mon Jul  1 00:00:33 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:00:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:00:42 2013] Setting source spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul  1 00:00:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul  1 00:12:12 2013] Not generating rmf since there are only 78 counts
[Mon Jul  1 00:12:12 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:36 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:36 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 162.00
[Mon Jul  1 00:27:36 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_bgd.pi.gz = 272.00
[Mon Jul  1 00:27:36 2013] Got source and background scale factors 415104.000000, 1846629.000000
[Mon Jul  1 00:27:36 2013] User source parameters:
  Position = (372.1, 216.7) = 19 18 49.00 60 36 37.1
  Extent = 6.1" x 6.1", rotation angle = 0
  Source aperture counts = 100.9 +/- 13.8
  Background aperture counts = 61.1
  Rate = 0.005 +/- 0.0006

[Mon Jul  1 00:27:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:36 2013] Using photon index=1.80, rate=0.00371, arf fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29.arf
[Mon Jul  1 00:27:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:36 2013] Updating source flux to 2.7e-14
[Mon Jul  1 00:27:44 2013] Flag b found in src. 29 procflags, skipping spectral fitting
[Mon Jul  1 00:27:44 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul  1 00:27:46 2013] xmm0560191901/analysis//spectral/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete