[Sun Jun 30 23:55:18 2013] Detection parameters:
  Position = (347.4, 404.0) = 19 19 3.41 60 50 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.6 +/- 12.4
  Background counts = 31.0
  Rate = 0.007 +/- 0.001

[Sun Jun 30 23:55:19 2013] Off-axis axis estimate = 8.43'
[Sun Jun 30 23:55:34 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:34 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun 30 23:55:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sun Jun 30 23:55:34 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.64"
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14.csv
[Sun Jun 30 23:55:34 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 30 23:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14.csv
[Sun Jun 30 23:55:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:35 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun 30 23:55:35 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun 30 23:55:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:41 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.389611 pixels away
[Sun Jun 30 23:55:41 2013] Source 14 is offset by 6.855787 and 6.205555 pixels which is larger than
2 X fitted extent = 1.223540 x 1.223540, not incorporating fit results
[Sun Jun 30 23:55:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:41 2013] Assessing source extent using major
[Sun Jun 30 23:55:41 2013] Source does appear to be extended
[Sun Jun 30 23:55:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:53 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:53 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun 30 23:55:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sun Jun 30 23:55:53 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 10.64"
[Sun Jun 30 23:55:53 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 30 23:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14.csv
[Sun Jun 30 23:55:53 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 30 23:55:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14.csv
[Sun Jun 30 23:55:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 30 23:55:54 2013] fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:00 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.948265 pixels away
[Sun Jun 30 23:56:00 2013] Spatial fit model total counts = 382.631000, observed total counts = 238.000000
[Sun Jun 30 23:56:00 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:56:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:00 2013] Assessing source extent using major
[Sun Jun 30 23:56:00 2013] Source does appear to be extended
[Sun Jun 30 23:56:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:56:12 2013] XMMSAS src. selection expression = ellipse(30171.343475, 35096.011292, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Not overwriting source region fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun 30 23:56:12 2013] Extracting stamp from image fullrun_pn_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (310, 366) - (385, 441)
[Sun Jun 30 23:56:12 2013] XMMSAS bgd. selection expression = annulus(30171.343475, 35096.011292, 1087.500000, 2175.000000, X, Y) && !ellipse(28530.761047, 35070.191132, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 23:56:12 2013] Writing fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14.gif
[Sun Jun 30 23:56:13 2013] ../../xmm0560191901/products/events/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0560191901/products/events/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Jun 30 23:56:13 2013] Mean detx,y = (8182.23, 5537.89) 
[Sun Jun 30 23:56:13 2013] ../../xmm0560191901/products/images/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src.img and ../../xmm0560191901/products/images/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Jun 30 23:56:13 2013] ../../xmm0560191901/products/spectra/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0560191901/products/spectra/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Jun 30 23:56:13 2013] Setting source spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 30 23:56:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 30 23:56:13 2013] ../../xmm0560191901/products/lightcurves/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0560191901/products/lightcurves/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon Jul  1 00:06:33 2013] Not generating rmf since there are only 80 counts
[Mon Jul  1 00:06:33 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:34 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:34 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 186.00
[Mon Jul  1 00:27:34 2013] Total counts from fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1389.00
[Mon Jul  1 00:27:34 2013] Got source and background scale factors 950633.000000, 8831752.000000
[Mon Jul  1 00:27:34 2013] User source parameters:
  Position = (347.4, 404.0) = 19 19 3.41 60 50 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 36.5 +/- 14.7
  Background aperture counts = 149.5
  Rate = 0.002 +/- 0.0007

[Mon Jul  1 00:27:34 2013] Updating counts from extracted products
[Mon Jul  1 00:27:34 2013] Set source signif. to 36.49/12.23 = 2.98
[Mon Jul  1 00:27:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:36 2013] Using photon index=1.80, rate=0.00172, arf fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14.arf
[Mon Jul  1 00:27:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:36 2013] Updating source flux to 9.5e-15
[Mon Jul  1 00:27:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:46 2013] xmm0560191901/analysis//spectral/fullrun_pn_xmm0560191901_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete