[Sun Jun 30 23:55:20 2013] Detection parameters:
  Position = (297.0, 410.4) = 19 19 33.35 60 50 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.8 +/- 8.6
  Background counts = 8.8
  Rate = 0.002 +/- 0.0005

[Sun Jun 30 23:55:20 2013] Off-axis axis estimate = 8.12'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Sun Jun 30 23:55:35 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.885
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 10.49"
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun 30 23:55:36 2013] Fit fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Jun 30 23:55:46 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.782973 pixels away
[Sun Jun 30 23:55:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:46 2013] Assessing source extent using major
[Sun Jun 30 23:55:46 2013] Source does appear to be extended
[Sun Jun 30 23:55:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Sun Jun 30 23:55:54 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.885
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.49"
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 30 23:55:55 2013] Fit fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Jun 30 23:56:04 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.583546 pixels away
[Sun Jun 30 23:56:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:04 2013] Assessing source extent using major
[Sun Jun 30 23:56:04 2013] Source does appear to be extended
[Sun Jun 30 23:56:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:20:05 2013] XMMSAS src. selection expression = ellipse(25793.343536, 35657.483612, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing source region out to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_src.reg
[Mon Jul  1 00:20:05 2013] Extracting stamp from image fullrun_mos2_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (260, 373) - (335, 448)
[Mon Jul  1 00:20:05 2013] XMMSAS bgd. selection expression = annulus(25793.343536, 35657.483612, 1087.500000, 2175.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7.gif
[Mon Jul  1 00:24:28 2013] Mean detx,y = (-8569.94, -1241.18) 
[Mon Jul  1 00:24:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:24:41 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:24:41 2013] Setting source spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul  1 00:24:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jul  1 00:26:39 2013] Not generating rmf since there are only 35 counts
[Mon Jul  1 00:26:39 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:40 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:40 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 82.00
[Mon Jul  1 00:27:40 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_bgd.pi.gz = 483.00
[Mon Jul  1 00:27:40 2013] Got source and background scale factors 1339200.000000, 10563700.000000
[Mon Jul  1 00:27:40 2013] User source parameters:
  Position = (297.0, 410.4) = 19 19 33.35 60 50 40.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 20.8 +/- 10.1
  Background aperture counts = 61.2
  Rate = 0.0009 +/- 0.0004

[Mon Jul  1 00:27:40 2013] Updating counts from extracted products
[Mon Jul  1 00:27:40 2013] Set source signif. to 20.77/7.83 = 2.65
[Mon Jul  1 00:27:40 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:40 2013] Using photon index=1.80, rate=0.000902, arf fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7.arf
[Mon Jul  1 00:27:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:40 2013] Updating source flux to 1.4e-14
[Mon Jul  1 00:27:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:44 2013] xmm0560191901/analysis//spectral/fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete