[Sun Jun 30 23:55:20 2013] Detection parameters:
  Position = (221.0, 133.3) = 19 20 18.11 60 30 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 11.6
  Background counts = 6.0
  Rate = 0.003 +/- 0.0005

[Sun Jun 30 23:55:20 2013] Off-axis axis estimate = 13.22'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 13.04"
[Sun Jun 30 23:55:35 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.858
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.04"
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:46 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 17.314784 pixels away
[Sun Jun 30 23:55:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:46 2013] Assessing source extent using major
[Sun Jun 30 23:55:46 2013] Source does appear to be extended
[Sun Jun 30 23:55:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 13.04"
[Sun Jun 30 23:55:54 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.858
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.04"
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:04 2013] Spatial fit model total counts = 128.549000, observed total counts = 105.000000
[Sun Jun 30 23:56:04 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:56:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:04 2013] Assessing source extent using major
[Sun Jun 30 23:56:04 2013] Source does appear to be extended
[Sun Jun 30 23:56:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:20:05 2013] XMMSAS src. selection expression = ellipse(19181.804184, 11545.754074, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing source region out to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_src.reg
[Mon Jul  1 00:20:05 2013] Extracting stamp from image fullrun_mos2_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (184, 96) - (259, 171)
[Mon Jul  1 00:20:05 2013] XMMSAS bgd. selection expression = annulus(19181.804184, 11545.754074, 1087.500000, 2175.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25.gif
[Mon Jul  1 00:23:43 2013] Mean detx,y = (15701.63, 4647.67) 
[Mon Jul  1 00:23:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:23:55 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:23:55 2013] Setting source spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jul  1 00:23:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Jul  1 00:26:14 2013] Not generating rmf since there are only 66 counts
[Mon Jul  1 00:26:14 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:39 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:39 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 78.00
[Mon Jul  1 00:27:39 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_bgd.pi.gz = 242.00
[Mon Jul  1 00:27:39 2013] Got source and background scale factors 1095838.000000, 5477227.000000
[Mon Jul  1 00:27:39 2013] User source parameters:
  Position = (221.0, 133.3) = 19 20 18.11 60 30 36.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.6 +/- 9.9
  Background aperture counts = 48.4
  Rate = 0.001 +/- 0.0004

[Mon Jul  1 00:27:39 2013] Updating counts from extracted products
[Mon Jul  1 00:27:39 2013] Set source signif. to 29.58/6.96 = 4.25
[Mon Jul  1 00:27:40 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:40 2013] Using photon index=1.80, rate=0.00129, arf fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25.arf
[Mon Jul  1 00:27:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:40 2013] Updating source flux to 5.4e-14
[Mon Jul  1 00:27:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:44 2013] xmm0560191901/analysis//spectral/fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete