[Sun Jun 30 23:55:20 2013] Detection parameters:
  Position = (447.0, 305.3) = 19 18 4.40 60 43 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 10.4
  Background counts = 8.7
  Rate = 0.003 +/- 0.0005

[Sun Jun 30 23:55:20 2013] Off-axis axis estimate = 10.79'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jun 30 23:55:35 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.869
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.82"
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 30 23:55:36 2013] Fit fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Jun 30 23:55:46 2013] Spatial fit model total counts = 176.648000, observed total counts = 162.000000
[Sun Jun 30 23:55:46 2013] Offset between fit and detection position for source 17 = 1.025217 pixels
[Sun Jun 30 23:55:46 2013] 175.478800 total counts/ 140.981000 bgd. counts: snr = 2.905435
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.025217 pixels
  Position = (446.7, 306.2) = 19 18 4.61 60 43 5.3
  Extent = 3.4 (3.0-5.2)", rotation angle = 0
  Source counts = 34.5 +/- 13.2
  Background counts = 141.0
  Rate = 0.001 +/- 0.0006
[Sun Jun 30 23:55:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:46 2013] Assessing source extent using major axis lower bound
[Sun Jun 30 23:55:46 2013] Source does appear to be extended
[Sun Jun 30 23:55:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 3.41"
[Sun Jun 30 23:55:54 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.367
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 3.41"
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 30 23:55:55 2013] Fit fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Jun 30 23:56:04 2013] Spatial fit model total counts = 149.863000, observed total counts = 137.000000
[Sun Jun 30 23:56:04 2013] Offset between fit and detection position for source 17 = 0.012529 pixels
[Sun Jun 30 23:56:04 2013] 151.234100 total counts/ 116.210000 bgd. counts: snr = 3.248967
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.012529 pixels
  Position = (446.7, 306.2) = 19 18 4.62 60 43 5.3
  Extent = 3.4 (2.7-5.3)", rotation angle = 0
  Source counts = 35.0 +/- 12.3
  Background counts = 116.2
  Rate = 0.002 +/- 0.0005
[Sun Jun 30 23:56:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:04 2013] Assessing source extent using major axis lower bound
[Sun Jun 30 23:56:04 2013] Source does appear to be extended
[Sun Jun 30 23:56:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:20:05 2013] XMMSAS src. selection expression = ellipse(38813.030600, 26592.707200, 205.333206, 205.333206, 0.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing source region out to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_src.reg
[Mon Jul  1 00:20:05 2013] Extracting stamp from image fullrun_mos2_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (435, 294) - (458, 318)
[Mon Jul  1 00:20:05 2013] XMMSAS bgd. selection expression = annulus(38813.030600, 26592.707200, 342.222010, 684.444020, X, Y)
[Mon Jul  1 00:20:05 2013] Writing fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17.gif
[Mon Jul  1 00:23:56 2013] Mean detx,y = (180.15, -14497.90) 
[Mon Jul  1 00:23:57 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:24:02 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:24:02 2013] Setting source spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jul  1 00:24:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jul  1 00:26:20 2013] Not generating rmf since there are only 35 counts
[Mon Jul  1 00:26:20 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:39 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:39 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 39.00
[Mon Jul  1 00:27:39 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_bgd.pi.gz = 50.00
[Mon Jul  1 00:27:39 2013] Got source and background scale factors 96747.000000, 876496.000000
[Mon Jul  1 00:27:39 2013] User source parameters:
  Position = (446.7, 306.2) = 19 18 4.62 60 43 5.3
  Extent = 3.4 (2.7-5.3)", rotation angle = 0
  Source aperture counts = 33.5 +/- 7.3
  Background aperture counts = 5.5
  Rate = 0.001 +/- 0.0003

[Mon Jul  1 00:27:40 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:40 2013] Using photon index=1.80, rate=0.00152, arf fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17.arf
[Mon Jul  1 00:27:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:40 2013] Updating source flux to 7.8e-14
[Mon Jul  1 00:27:43 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul  1 00:27:44 2013] xmm0560191901/analysis//spectral/fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete