[Sun Jun 30 23:55:20 2013] Detection parameters:
  Position = (246.8, 314.0) = 19 20 3.12 60 43 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 8.2
  Background counts = 9.5
  Rate = 0.002 +/- 0.0004

[Sun Jun 30 23:55:20 2013] Off-axis axis estimate = 3.91'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Sun Jun 30 23:55:35 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.849
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.38"
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 30 23:55:36 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 30 23:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 30 23:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:46 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.734374 pixels away
[Sun Jun 30 23:55:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:46 2013] Assessing source extent using major
[Sun Jun 30 23:55:46 2013] Source does appear to be extended
[Sun Jun 30 23:55:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Sun Jun 30 23:55:54 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.849
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.38"
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 30 23:55:55 2013] fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 30 23:55:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 30 23:55:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:04 2013] Source 16 is offset by -7.874809 and 0.395350 pixels which is larger than
2 X fitted extent = 0.963508 x 0.963508, not incorporating fit results
[Sun Jun 30 23:56:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:04 2013] Assessing source extent using major
[Sun Jun 30 23:56:04 2013] Source does appear to be extended
[Sun Jun 30 23:56:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:20:05 2013] XMMSAS src. selection expression = ellipse(21425.991592, 27270.235443, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing source region out to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_src.reg
[Mon Jul  1 00:20:05 2013] Extracting stamp from image fullrun_mos2_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (209, 277) - (284, 352)
[Mon Jul  1 00:20:05 2013] XMMSAS bgd. selection expression = annulus(21425.991592, 27270.235443, 1087.500000, 2175.000000, X, Y) && !ellipse(24437.584686, 27117.048218, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  1 00:20:05 2013] Writing fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16.gif
[Mon Jul  1 00:25:25 2013] Mean detx,y = (-3.14, 2864.95) 
[Mon Jul  1 00:25:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:25:31 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:25:31 2013] Setting source spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jul  1 00:25:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Jul  1 00:27:06 2013] Not generating rmf since there are only 30 counts
[Mon Jul  1 00:27:06 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:40 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:40 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 77.00
[Mon Jul  1 00:27:40 2013] Total counts from fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_bgd.pi.gz = 510.00
[Mon Jul  1 00:27:40 2013] Got source and background scale factors 1196608.000000, 10534388.000000
[Mon Jul  1 00:27:40 2013] User source parameters:
  Position = (246.8, 314.0) = 19 20 3.12 60 43 40.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19.1 +/- 9.8
  Background aperture counts = 57.9
  Rate = 0.0008 +/- 0.0004

[Mon Jul  1 00:27:40 2013] Updating counts from extracted products
[Mon Jul  1 00:27:40 2013] Set source signif. to 19.07/7.61 = 2.51
[Mon Jul  1 00:27:40 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:40 2013] Using photon index=1.80, rate=0.000828, arf fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16.arf
[Mon Jul  1 00:27:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:40 2013] Updating source flux to 1.1e-14
[Mon Jul  1 00:27:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:44 2013] xmm0560191901/analysis//spectral/fullrun_mos2_xmm0560191901_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete