[Sun Jun 30 23:55:19 2013] Detection parameters:
  Position = (346.2, 489.9) = 19 19 4.02 60 56 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 9.5
  Background counts = 9.6
  Rate = 0.002 +/- 0.0004

[Sun Jun 30 23:55:19 2013] Off-axis axis estimate = 14.31'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Sun Jun 30 23:55:35 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.934
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.58"
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 30 23:55:35 2013] Fit fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src13 appears to have run properly
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 30 23:55:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:43 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.622327 pixels away
[Sun Jun 30 23:55:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:43 2013] Assessing source extent using major
[Sun Jun 30 23:55:43 2013] Source does appear to be extended
[Sun Jun 30 23:55:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Sun Jun 30 23:55:54 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.934
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.58"
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 30 23:55:54 2013] Fit fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src13 appears to have run properly
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:02 2013] Spatial fit model total counts = 176.425000, observed total counts = 160.000000
[Sun Jun 30 23:56:02 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:56:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:02 2013] Assessing source extent using major
[Sun Jun 30 23:56:02 2013] Source does appear to be extended
[Sun Jun 30 23:56:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:12:32 2013] XMMSAS src. selection expression = ellipse(30067.672546, 42572.180847, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  1 00:12:32 2013] Writing source region out to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_src.reg
[Mon Jul  1 00:12:32 2013] Extracting stamp from image fullrun_mos1_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (309, 452) - (384, 527)
[Mon Jul  1 00:12:32 2013] XMMSAS bgd. selection expression = annulus(30067.672546, 42572.180847, 1087.500000, 2175.000000, X, Y)
[Mon Jul  1 00:12:32 2013] Writing fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5.gif
[Mon Jul  1 00:14:28 2013] Mean detx,y = (-5171.22, 15349.41) 
[Mon Jul  1 00:14:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:14:39 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:14:39 2013] Setting source spectrum file to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul  1 00:14:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jul  1 00:19:35 2013] Not generating rmf since there are only 49 counts
[Mon Jul  1 00:19:35 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:38 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:38 2013] Total counts from fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 91.00
[Mon Jul  1 00:27:38 2013] Total counts from fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_bgd.pi.gz = 320.00
[Mon Jul  1 00:27:38 2013] Got source and background scale factors 1146944.000000, 5446113.000000
[Mon Jul  1 00:27:38 2013] User source parameters:
  Position = (346.2, 489.9) = 19 19 4.02 60 56 26.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 23.6 +/- 10.6
  Background aperture counts = 67.4
  Rate = 0.001 +/- 0.0005

[Mon Jul  1 00:27:38 2013] Updating counts from extracted products
[Mon Jul  1 00:27:38 2013] Set source signif. to 23.61/8.21 = 2.88
[Mon Jul  1 00:27:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:38 2013] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5.arf
[Mon Jul  1 00:27:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:38 2013] Updating source flux to 2.6e-14
[Mon Jul  1 00:27:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:43 2013] xmm0560191901/analysis//spectral/fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete