[Sun Jun 30 23:55:19 2013] Detection parameters:
  Position = (320.4, 241.4) = 19 19 19.53 60 38 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 9.0
  Background counts = 9.7
  Rate = 0.003 +/- 0.0006

[Sun Jun 30 23:55:19 2013] Off-axis axis estimate = 4.43'
[Sun Jun 30 23:55:35 2013] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:35 2013] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Jun 30 23:55:35 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.889
[Sun Jun 30 23:55:35 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.65"
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6.csv
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6.csv
[Sun Jun 30 23:55:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 30 23:55:35 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 30 23:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 30 23:55:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:43 2013] Spatial fit model total counts = 170.497000, observed total counts = 122.000000
[Sun Jun 30 23:55:43 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:55:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:55:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:55:43 2013] Assessing source extent using major
[Sun Jun 30 23:55:43 2013] Source does appear to be extended
[Sun Jun 30 23:55:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 23:55:54 2013] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 23:55:54 2013] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Jun 30 23:55:54 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.889
[Sun Jun 30 23:55:54 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.65"
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6.csv
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 30 23:55:54 2013] fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 30 23:55:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 30 23:55:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 23:56:02 2013] Spatial fit model total counts = 170.613000, observed total counts = 122.000000
[Sun Jun 30 23:56:02 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 23:56:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 23:56:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 23:56:02 2013] Assessing source extent using major
[Sun Jun 30 23:56:02 2013] Source does appear to be extended
[Sun Jun 30 23:56:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 00:12:32 2013] XMMSAS src. selection expression = ellipse(27826.283539, 20951.059952, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  1 00:12:32 2013] Writing source region out to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul  1 00:12:32 2013] Extracting stamp from image fullrun_mos1_xmm0560191901_pi300-10000_cl_sm2.00.img.gz, (283, 204) - (358, 279)
[Mon Jul  1 00:12:32 2013] XMMSAS bgd. selection expression = annulus(27826.283539, 20951.059952, 1087.500000, 2175.000000, X, Y)
[Mon Jul  1 00:12:32 2013] Writing fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14.gif
[Mon Jul  1 00:13:11 2013] Mean detx,y = (-3441.52, -6241.00) 
[Mon Jul  1 00:13:12 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 00:13:21 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 00:13:21 2013] Setting source spectrum file to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul  1 00:13:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jul  1 00:18:58 2013] Not generating rmf since there are only 45 counts
[Mon Jul  1 00:18:58 2013] rmf not generated due to insufficient counts
[Mon Jul  1 00:27:37 2013] Updating aperture counts using extracted products
[Mon Jul  1 00:27:37 2013] Total counts from fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 99.00
[Mon Jul  1 00:27:37 2013] Total counts from fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_bgd.pi.gz = 491.00
[Mon Jul  1 00:27:37 2013] Got source and background scale factors 1034910.000000, 10437296.000000
[Mon Jul  1 00:27:37 2013] User source parameters:
  Position = (320.4, 241.4) = 19 19 19.53 60 38 23.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.3 +/- 11.0
  Background aperture counts = 48.7
  Rate = 0.002 +/- 0.0005

[Mon Jul  1 00:27:37 2013] Updating counts from extracted products
[Mon Jul  1 00:27:37 2013] Set source signif. to 50.31/6.98 = 7.21
[Mon Jul  1 00:27:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 00:27:38 2013] Using photon index=1.80, rate=0.00219, arf fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14.arf
[Mon Jul  1 00:27:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 00:27:38 2013] Updating source flux to 3.8e-14
[Mon Jul  1 00:27:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  1 00:27:43 2013] xmm0560191901/analysis//spectral/fullrun_mos1_xmm0560191901_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete