[Wed May 23 00:42:58 2012] Detection parameters:
  Position = (269.4, 406.1) = 9 55 44.30 18 15 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.7 +/- 20.7
  Background counts = 48.0
  Rate = 0.02 +/- 0.002

[Wed May 23 00:42:58 2012] Off-axis axis estimate = 8.08'
[Wed May 23 00:47:59 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Wed May 23 00:47:59 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Wed May 23 00:47:59 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Wed May 23 00:47:59 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.47"
[Wed May 23 01:18:20 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 23 01:18:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4.csv
[Wed May 23 01:18:20 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 23 01:18:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4.csv
[Wed May 23 01:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 01:18:20 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 23 01:18:20 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 23 01:18:20 2012] Fit fullrun_pn_xmm0560191801_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed May 23 01:47:59 2012] Spatial fit model total counts = 320.504000, observed total counts = 303.000000
[Wed May 23 01:47:59 2012] Offset between fit and detection position for source 4 = 0.066432 pixels
[Wed May 23 01:47:59 2012] 317.504000 total counts/ 185.074000 bgd. counts: snr = 9.734501
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.066432 pixels
  Position = (269.4, 406.1) = 9 55 44.31 18 15 11.1
  Extent = 6.1 (5.1-7.0)", rotation angle = 0
  Source counts = 132.4 +/- 17.8
  Background counts = 185.1
  Rate = 0.01 +/- 0.002
[Wed May 23 01:47:59 2012] Vigneting correction estimate = 1.000000
[Wed May 23 01:47:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 01:47:59 2012] Assessing source extent using major axis lower bound
[Wed May 23 01:47:59 2012] Source does appear to be extended
[Wed May 23 01:47:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 01:48:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 01:48:15 2012] Initial guess for spatial extent in simple fitting = 6.05"
[Wed May 23 01:48:15 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.839
[Wed May 23 01:48:15 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.05"
[Wed May 23 02:15:23 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 23 02:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4.csv
[Wed May 23 02:15:23 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 23 02:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4.csv
[Wed May 23 02:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:15:23 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 23 02:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 23 02:15:23 2012] fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 23 02:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 23 02:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:44:33 2012] Warning, spatial fit 4 centroid is now closest to src. 7
[Wed May 23 02:44:33 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:44:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:44:33 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:44:33 2012] Source does appear to be extended
[Wed May 23 02:44:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 02:44:48 2012] XMMSAS src. selection expression = ellipse(23389.179800, 35283.870400, 363.036010, 363.036010, 0.000000, X, Y)
[Wed May 23 02:44:48 2012] Writing source region out to fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_src.reg
[Wed May 23 02:44:48 2012] Extracting stamp from image fullrun_pn_xmm0560191801_pi300-10000_cl_sm2.00.img.gz, (249, 385) - (290, 427)
[Wed May 23 02:44:48 2012] XMMSAS bgd. selection expression = annulus(23389.179800, 35283.870400, 605.060017, 1210.120035, X, Y)
[Wed May 23 02:44:48 2012] Writing fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4.gif
[Wed May 23 02:47:47 2012] Mean detx,y = (113.12, -8152.99) 
[Wed May 23 02:47:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 02:48:05 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 02:48:05 2012] Setting source spectrum file to fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 02:48:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 23 03:13:18 2012] Updating aperture counts using extracted products
[Wed May 23 03:13:18 2012] Error reading totcts from fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 03:13:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 03:13:18 2012] Using photon index=1.80, rate=0.0141, arf fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4.arf
[Wed May 23 03:13:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 03:13:18 2012] Updating source flux to 6.1e-14
[Wed May 23 03:13:46 2012] Reading fit data from xmm0560191801/analysis//spectral/fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_pl.csv
[Wed May 23 03:13:46 2012] Spectral fit parameter nH value = 2.56875e+20
[Wed May 23 03:13:46 2012] Spectral fit parameter PhoIndex value = 2.34899
[Wed May 23 03:13:46 2012] Failed to get F(0.3-8.0) from xmm0560191801/analysis//spectral/fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed May 23 03:13:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 03:13:46 2012] Using Nh = 2.6e+20, photon index=2.35, rate=0.0141, arf fullrun_pn_xmm0560191801_pi300-10000_pass1_cl_src4.arf
[Wed May 23 03:13:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 03:13:46 2012] Updating source flux to 4.7e-14