[Mon Mar 12 17:27:57 2012] Detection parameters:
  Position = (296.8, 244.2) = 4 22 51.41 -25 10 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.5 +/- 10.3
  Background counts = 13.4
  Rate = 0.006 +/- 0.001

[Mon Mar 12 17:27:57 2012] Off-axis axis estimate = 3.93'
[Mon Mar 12 17:30:57 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 17:30:57 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Mon Mar 12 17:30:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Mon Mar 12 17:30:57 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.40"
[Mon Mar 12 18:38:00 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25.ximg exists
[Mon Mar 12 18:38:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25.csv
[Mon Mar 12 18:38:00 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Mar 12 18:38:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25.csv
[Mon Mar 12 18:38:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:38:01 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Mar 12 18:38:01 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Mar 12 18:38:01 2012] Fit fullrun_pn_xmm0560191701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Mar 12 19:38:01 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.001385 pixels away
[Mon Mar 12 19:38:01 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:38:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:38:01 2012] Assessing source extent using major
[Mon Mar 12 19:38:01 2012] Source does appear to be extended
[Mon Mar 12 19:38:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:38:24 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 19:38:24 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Mon Mar 12 19:38:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Mon Mar 12 19:38:24 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.40"
[Mon Mar 12 20:49:08 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25.ximg exists
[Mon Mar 12 20:49:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25.csv
[Mon Mar 12 20:49:08 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Mar 12 20:49:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25.csv
[Mon Mar 12 20:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 20:49:08 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Mar 12 20:49:08 2012] fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Mar 12 20:49:08 2012] Fit fullrun_pn_xmm0560191701_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Mar 12 21:50:47 2012] Spatial fit model total counts = 180.346000, observed total counts = 179.000000
[Mon Mar 12 21:50:47 2012] Offset between fit and detection position for source 25 = 0.324175 pixels
[Mon Mar 12 21:50:47 2012] 177.844500 total counts/ 144.258000 bgd. counts: snr = 2.796371
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.324175 pixels
  Position = (296.8, 244.5) = 4 22 51.40 -25 10 15.4
  Extent = 4.6 (3.1-7.5)", rotation angle = 0
  Source counts = 33.6 +/- 13.3
  Background counts = 144.3
  Rate = 0.003 +/- 0.001
[Mon Mar 12 21:50:47 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 21:50:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 21:50:47 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 21:50:47 2012] Source does appear to be extended
[Mon Mar 12 21:50:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 21:51:08 2012] XMMSAS src. selection expression = ellipse(25771.908200, 21225.449600, 274.513808, 274.513808, 0.000000, X, Y)
[Mon Mar 12 21:51:08 2012] Writing source region out to fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25_src.reg
[Mon Mar 12 21:51:08 2012] Extracting stamp from image fullrun_pn_xmm0560191701_pi300-10000_cl_sm2.00.img.gz, (281, 229) - (313, 260)
[Mon Mar 12 21:51:08 2012] XMMSAS bgd. selection expression = annulus(25771.908200, 21225.449600, 457.523013, 915.046026, X, Y) && !ellipse(27506.628632, 20677.645035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24383.378000, 20506.830400, 500.825614, 500.825614, 0.000000, X, Y)
[Mon Mar 12 21:51:08 2012] Writing fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25.gif
[Mon Mar 12 22:13:42 2012] Mean detx,y = (-327.10, -3180.71) 
[Mon Mar 12 22:13:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 22:14:05 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 22:14:05 2012] Setting source spectrum file to fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Mar 12 22:14:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Mar 12 22:27:33 2012] Not generating rmf since there are only 33 counts
[Mon Mar 12 22:27:33 2012] rmf not generated due to insufficient counts
[Mon Mar 12 22:50:44 2012] Updating aperture counts using extracted products
[Mon Mar 12 22:50:44 2012] Error reading totcts from fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Mar 12 22:50:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 22:50:45 2012] Using photon index=1.80, rate=0.00279, arf fullrun_pn_xmm0560191701_pi300-10000_pass1_cl_src25.arf
[Mon Mar 12 22:50:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 22:50:45 2012] Updating source flux to 1e-14
[Mon Mar 12 22:51:17 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting