[Thu Dec 29 20:22:33 2011] Detection parameters:
  Position = (287.2, 318.1) = 11 47 26.15 -60 14 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.8 +/- 27.7
  Background counts = 173.5
  Rate = 0.004 +/- 0.0005

[Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 1.64'
[Thu Dec 29 20:32:39 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Dec 29 20:32:39 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 7.25"
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32.csv
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32.csv
[Fri Dec 30 00:15:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Dec 30 00:15:18 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Dec 30 00:15:18 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Dec 30 00:15:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:19 2011] Spatial fit model total counts = -319.788000, observed total counts = 3715.000000
[Fri Dec 30 02:56:19 2011] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 30 02:56:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:19 2011] Assessing source extent using major
[Fri Dec 30 02:56:19 2011] Source does appear to be extended
[Fri Dec 30 02:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:50 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 02:56:50 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Dec 30 02:56:50 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri Dec 30 02:56:50 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 7.25"
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src29.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src29 appears to have run properly
[Fri Dec 30 06:23:34 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Dec 30 06:23:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Dec 30 06:23:34 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Dec 30 06:23:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Dec 30 06:23:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 08:03:11 2011] Warning, spatial fit 29 centroid is now closest to src. 30
[Fri Dec 30 08:03:11 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:11 2011] Assessing source extent using major
[Fri Dec 30 08:03:11 2011] Source does appear to be extended
[Fri Dec 30 08:03:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:37 2011] XMMSAS src. selection expression = ellipse(24933.995514, 27626.171326, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing source region out to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34_src.reg
[Fri Dec 30 08:03:37 2011] Extracting stamp from image fullrun_pn_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (250, 281) - (325, 356)
[Fri Dec 30 08:03:37 2011] XMMSAS bgd. selection expression = annulus(24933.995514, 27626.171326, 1087.500000, 2175.000000, X, Y) && !ellipse(25825.756200, 28174.140200, 1428.182441, 1428.182441, 0.000000, X, Y) && !ellipse(26233.298000, 30039.448000, 592.545617, 592.545617, 0.000000, X, Y) && !ellipse(26835.854000, 29488.260000, 746.316021, 746.316021, 0.000000, X, Y) && !ellipse(25036.840729, 28942.649017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.122000, 27052.482000, 1128.688032, 1128.688032, 0.000000, X, Y) && !ellipse(27257.053223, 26590.263855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27484.716000, 26255.964000, 2257.376065, 2257.376065, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34.gif
[Fri Dec 30 08:52:50 2011] Mean detx,y = (-529.55, -421.71) 
[Fri Dec 30 08:52:59 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 08:53:38 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 08:53:38 2011] Setting source spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Dec 30 08:53:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Dec 30 11:30:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 11:30:00 2011] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:55 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:55 2012] Error reading totcts from fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jan  1 04:56:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:57 2012] Using photon index=1.80, rate=0.00408, arf fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src34.arf
[Sun Jan  1 04:56:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:57 2012] Updating source flux to 1e-14
[Sun Jan  1 04:59:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting