[Thu Dec 29 20:22:33 2011] Detection parameters:
  Position = (288.3, 333.2) = 11 47 25.46 -60 13 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 20.9
  Background counts = 168.8
  Rate = 0.004 +/- 0.0006

[Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 2.63'
[Thu Dec 29 20:32:39 2011] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 7.74"
[Thu Dec 29 20:32:39 2011] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.866
[Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 7.74"
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28.csv
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28.csv
[Fri Dec 30 00:15:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Dec 30 00:15:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Dec 30 00:15:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Dec 30 00:15:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:19 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.310912 pixels away
[Fri Dec 30 02:56:19 2011] Source 30 is offset by 7.456284 and -0.278960 pixels which is larger than
2 X fitted extent = 7.119035 x 7.119035, not incorporating fit results
[Fri Dec 30 02:56:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:19 2011] Assessing source extent using major
[Fri Dec 30 02:56:19 2011] Source does appear to be extended
[Fri Dec 30 02:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:50 2011] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 02:56:50 2011] Initial guess for spatial extent in simple fitting = 7.74"
[Fri Dec 30 02:56:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.866
[Fri Dec 30 02:56:50 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 7.74"
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src26.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Dec 30 08:03:11 2011] Source 30 is offset by -6.781785 and 6.350632 pixels which is larger than
2 X fitted extent = 7.119035 x 3.519485, not incorporating fit results
[Fri Dec 30 08:03:11 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.703998 pixels away
[Fri Dec 30 08:03:11 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:11 2011] Assessing source extent using major
[Fri Dec 30 08:03:11 2011] Source does appear to be extended
[Fri Dec 30 08:03:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:37 2011] XMMSAS src. selection expression = ellipse(25036.840729, 28942.649017, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing source region out to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30_src.reg
[Fri Dec 30 08:03:37 2011] Extracting stamp from image fullrun_pn_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (251, 296) - (326, 371)
[Fri Dec 30 08:03:37 2011] XMMSAS bgd. selection expression = annulus(25036.840729, 28942.649017, 1087.500000, 2175.000000, X, Y) && !ellipse(25825.756200, 28174.140200, 1428.182441, 1428.182441, 0.000000, X, Y) && !ellipse(26233.298000, 30039.448000, 592.545617, 592.545617, 0.000000, X, Y) && !ellipse(26835.854000, 29488.260000, 746.316021, 746.316021, 0.000000, X, Y) && !ellipse(24933.995514, 27626.171326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.122000, 27052.482000, 1128.688032, 1128.688032, 0.000000, X, Y) && !ellipse(27257.053223, 26590.263855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27484.716000, 26255.964000, 2257.376065, 2257.376065, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30.gif
[Fri Dec 30 08:48:36 2011] Mean detx,y = (220.83, -1229.89) 
[Fri Dec 30 08:48:45 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 08:49:17 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 08:49:18 2011] Setting source spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Dec 30 08:49:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Dec 30 11:18:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 11:18:36 2011] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:54 2012] Error reading totcts from fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jan  1 04:56:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:56 2012] Using photon index=1.80, rate=0.00382, arf fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src30.arf
[Sun Jan  1 04:56:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:56 2012] Updating source flux to 1.1e-14
[Sun Jan  1 04:59:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting