[Thu Dec 29 20:22:33 2011] Detection parameters: Position = (383.6, 335.3) = 11 46 29.81 -60 13 41.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 131.3 +/- 21.2 Background counts = 153.4 Rate = 0.003 +/- 0.0005 [Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 6.73' [Thu Dec 29 20:32:39 2011] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting [Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 9.79" [Thu Dec 29 20:32:39 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.826 [Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 9.79" [Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27.ximg exists [Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27.csv [Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27_1.ximg exists [Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27.csv [Fri Dec 30 00:15:17 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Fri Dec 30 00:15:18 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly [Fri Dec 30 02:56:19 2011] Warning, spatial fit 27 centroid is now closest to src. 26 [Fri Dec 30 02:56:19 2011] Spatial fit model total counts = 854.909000, observed total counts = 852.000000 [Fri Dec 30 02:56:19 2011] Offset between fit and detection position for source 29 = 1.341787 pixels [Fri Dec 30 02:56:19 2011] Warning, changing simple spatial fit ID from 27 to 29 [Fri Dec 30 02:56:19 2011] 877.367800 total counts/ 856.715000 bgd. counts: snr = 0.705604 Spatial fit parameters: Offset between fit and detection position for source 29 = 1.341787 pixels Position = (384.7, 334.4) = 11 46 29.20 -60 13 43.8 Extent = 4.6 (2.4-8.5)", rotation angle = 0 Source counts = 20.7 +/- 29.6 Background counts = 856.7 Rate = 0.0005 +/- 0.0007 Deleting source due to low Poisson probability