[Thu Dec 29 20:22:33 2011] Detection parameters:
  Position = (321.4, 339.6) = 11 47 6.13 -60 13 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.0 +/- 25.0
  Background counts = 170.9
  Rate = 0.005 +/- 0.0005

[Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 3.42'
[Thu Dec 29 20:32:39 2011] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 8.14"
[Thu Dec 29 20:32:39 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 8.14"
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25.csv
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25.csv
[Fri Dec 30 00:15:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Dec 30 00:15:18 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Dec 30 02:56:19 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.225354 pixels away
[Fri Dec 30 02:56:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:19 2011] Assessing source extent using major
[Fri Dec 30 02:56:19 2011] Source does appear to be extended
[Fri Dec 30 02:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:50 2011] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 02:56:50 2011] Initial guess for spatial extent in simple fitting = 8.14"
[Fri Dec 30 02:56:50 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Fri Dec 30 02:56:50 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 8.14"
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24.csv
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24.csv
[Fri Dec 30 06:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Dec 30 08:03:11 2011] Spatial fit model total counts = 1039.790000, observed total counts = 1036.000000
[Fri Dec 30 08:03:11 2011] Offset between fit and detection position for source 27 = 0.147936 pixels
[Fri Dec 30 08:03:11 2011] 963.099000 total counts/ 836.402000 bgd. counts: snr = 4.380854
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.147936 pixels
  Position = (321.3, 339.7) = 11 47 6.21 -60 13 21.6
  Extent = 4.8 (4.2-5.6)", rotation angle = 0
  Source counts = 126.7 +/- 31.0
  Background counts = 836.4
  Rate = 0.003 +/- 0.0007
[Fri Dec 30 08:03:11 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:11 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:03:11 2011] Source does appear to be extended
[Fri Dec 30 08:03:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:37 2011] XMMSAS src. selection expression = ellipse(27903.911000, 29502.536000, 289.533008, 289.533008, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing source region out to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27_src.reg
[Fri Dec 30 08:03:37 2011] Extracting stamp from image fullrun_pn_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (305, 323) - (338, 356)
[Fri Dec 30 08:03:37 2011] XMMSAS bgd. selection expression = annulus(27903.911000, 29502.536000, 482.555014, 965.110028, X, Y) && !ellipse(25825.756200, 28174.140200, 1428.182441, 1428.182441, 0.000000, X, Y) && !ellipse(26835.854000, 29488.260000, 746.316021, 746.316021, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27.gif
[Fri Dec 30 08:45:19 2011] Mean detx,y = (2773.23, 80.95) 
[Fri Dec 30 08:45:26 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 08:46:00 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 08:46:00 2011] Setting source spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Dec 30 08:46:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jan  1 04:56:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:54 2012] Error reading totcts from fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jan  1 04:56:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:56 2012] Using photon index=1.80, rate=0.00288, arf fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src27.arf
[Sun Jan  1 04:56:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:56 2012] Updating source flux to 9e-15