[Thu Dec 29 20:22:32 2011] Detection parameters:
  Position = (213.8, 434.2) = 11 48 8.80 -60 6 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 19.4
  Background counts = 131.1
  Rate = 0.002 +/- 0.0003

[Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 11.60'
[Thu Dec 29 20:32:39 2011] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 12.23"
[Thu Dec 29 20:32:39 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.958
[Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 12.23"
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17.csv
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17.csv
[Fri Dec 30 00:15:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Dec 30 00:15:18 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Dec 30 02:56:19 2011] Spatial fit model total counts = 700.316000, observed total counts = 701.000000
[Fri Dec 30 02:56:19 2011] Offset between fit and detection position for source 19 = 0.391304 pixels
[Fri Dec 30 02:56:19 2011] 717.696500 total counts/ 644.300000 bgd. counts: snr = 2.891554
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.391304 pixels
  Position = (213.5, 433.9) = 11 48 8.96 -60 6 31.1
  Extent = 7.7 (5.1-10.8)", rotation angle = 0
  Source counts = 73.4 +/- 26.8
  Background counts = 644.3
  Rate = 0.002 +/- 0.0006
[Fri Dec 30 02:56:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:19 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 02:56:19 2011] Source does appear to be extended
[Fri Dec 30 02:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 02:56:50 2011] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Dec 30 02:56:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.973
[Fri Dec 30 02:56:50 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 7.69"
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17.csv
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17.csv
[Fri Dec 30 06:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Dec 30 08:03:11 2011] Spatial fit model total counts = 623.001000, observed total counts = 623.000000
[Fri Dec 30 08:03:11 2011] Offset between fit and detection position for source 19 = 0.059225 pixels
[Fri Dec 30 08:03:11 2011] 639.990600 total counts/ 561.588000 bgd. counts: snr = 3.308427
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.059225 pixels
  Position = (213.5, 433.9) = 11 48 8.97 -60 6 31.3
  Extent = 7.8 (5.4-11.2)", rotation angle = 0
  Source counts = 78.4 +/- 25.3
  Background counts = 561.6
  Rate = 0.002 +/- 0.0006
[Fri Dec 30 08:03:11 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:11 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:03:11 2011] Source does appear to be extended
[Fri Dec 30 08:03:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:36 2011] XMMSAS src. selection expression = ellipse(18528.898200, 37697.687000, 469.264814, 469.264814, 0.000000, X, Y)
[Fri Dec 30 08:03:36 2011] Writing source region out to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19_src.reg
[Fri Dec 30 08:03:36 2011] Extracting stamp from image fullrun_pn_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (187, 407) - (241, 461)
[Fri Dec 30 08:03:37 2011] XMMSAS bgd. selection expression = annulus(18528.898200, 37697.687000, 782.108023, 1564.216045, X, Y) && !ellipse(20203.407684, 39212.241272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18337.909760, 35696.480682, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 08:03:37 2011] Writing fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19.gif
[Fri Dec 30 08:38:22 2011] Mean detx,y = (1143.17, -12271.55) 
[Fri Dec 30 08:38:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 08:39:02 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 08:39:03 2011] Setting source spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Dec 30 08:39:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Dec 30 11:01:09 2011] Not generating rmf since there are only 78 counts
[Fri Dec 30 11:01:09 2011] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:54 2012] Error reading totcts from fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jan  1 04:56:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:56 2012] Using photon index=1.80, rate=0.00178, arf fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src19.arf
[Sun Jan  1 04:56:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:56 2012] Updating source flux to 1.7e-14
[Sun Jan  1 04:59:02 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting