[Thu Dec 29 20:22:31 2011] Detection parameters:
  Position = (415.3, 267.7) = 11 46 11.12 -60 18 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 475.1 +/- 64.1
  Background counts = 136.3
  Rate = 0.008 +/- 0.001

[Thu Dec 29 20:22:35 2011] Off-axis axis estimate = 8.76'
[Thu Dec 29 20:32:39 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:32:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 20:32:39 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Thu Dec 29 20:32:39 2011] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.505
[Thu Dec 29 20:32:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.81"
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 00:15:17 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 00:15:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 00:15:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 00:15:18 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 00:15:18 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 02:56:19 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.038025 pixels away
[Fri Dec 30 02:56:19 2011] Source 1 is offset by -5.294184 and -6.922816 pixels which is larger than
2 X fitted extent = 1.294956 x 1.294956, not incorporating fit results
[Fri Dec 30 02:56:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:19 2011] Assessing source extent using major
[Fri Dec 30 02:56:19 2011] Source does appear to be extended
[Fri Dec 30 02:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:50 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 02:56:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 02:56:50 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Fri Dec 30 02:56:50 2011] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.505
[Fri Dec 30 02:56:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.81"
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 06:23:32 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 06:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 06:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 06:23:33 2011] fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 06:23:33 2011] Fit fullrun_pn_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 08:03:11 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.659758 pixels away
[Fri Dec 30 08:03:11 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:11 2011] Assessing source extent using major
[Fri Dec 30 08:03:11 2011] Source does appear to be extended
[Fri Dec 30 08:03:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:36 2011] XMMSAS src. selection expression = ellipse(36086.615997, 23242.925049, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 08:03:36 2011] Writing source region out to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 08:03:36 2011] Extracting stamp from image fullrun_pn_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (378, 230) - (453, 305)
[Fri Dec 30 08:03:36 2011] XMMSAS bgd. selection expression = annulus(36086.615997, 23242.925049, 1087.500000, 2175.000000, X, Y) && !ellipse(37457.091675, 24656.104218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32728.957600, 20241.590400, 3295.712095, 411.964012, 49.706000, X, Y) && !ellipse(33094.980000, 19859.508000, 1669.616048, 1669.616048, 0.000000, X, Y)
[Fri Dec 30 08:03:36 2011] Writing fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 08:04:17 2011] Mean detx,y = (4730.46, 10114.27) 
[Fri Dec 30 08:04:24 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 08:05:13 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 08:05:14 2011] Setting source spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 08:05:14 2011] Setting bgd. spectrum file to fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 30 09:40:56 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 09:40:56 2011] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:53 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:53 2012] Error reading totcts from fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 04:56:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:55 2012] Using photon index=1.80, rate=0.00767, arf fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 04:56:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:55 2012] Getting flux using calc_pl_flux failed
[Sun Jan  1 04:59:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jan  1 05:03:39 2012] xmm0560191401/analysis//spectral/fullrun_pn_xmm0560191401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete