[Thu Dec 29 20:24:16 2011] Detection parameters:
  Position = (436.6, 400.8) = 11 45 59.07 -60 8 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.5 +/- 17.2
  Background counts = 49.0
  Rate = 0.002 +/- 0.0003

[Thu Dec 29 20:24:16 2011] Off-axis axis estimate = 12.47'
[Fri Dec 30 01:28:13 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 01:28:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 01:28:13 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Fri Dec 30 01:28:13 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Fri Dec 30 01:28:13 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 12.66"
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11.csv
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11.csv
[Fri Dec 30 02:56:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Dec 30 02:56:04 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Dec 30 02:56:32 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.729093 pixels away
[Fri Dec 30 02:56:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:32 2011] Assessing source extent using major
[Fri Dec 30 02:56:32 2011] Source does appear to be extended
[Fri Dec 30 02:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 07:07:26 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:07:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 07:07:26 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Fri Dec 30 07:07:26 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Fri Dec 30 07:07:26 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 12.66"
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 08:02:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Dec 30 08:02:55 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Dec 30 08:03:21 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.888937 pixels away
[Fri Dec 30 08:03:21 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:21 2011] Assessing source extent using major
[Fri Dec 30 08:03:21 2011] Source does appear to be extended
[Fri Dec 30 08:03:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:20:57 2012] XMMSAS src. selection expression = ellipse(37935.095184, 34822.283081, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing source region out to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7_src.reg
[Sun Jan  1 04:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (399, 363) - (474, 438)
[Sun Jan  1 04:20:57 2012] XMMSAS bgd. selection expression = annulus(37935.095184, 34822.283081, 1087.500000, 2175.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7.gif
[Sun Jan  1 04:32:47 2012] Mean detx,y = (-13650.16, -2697.90) 
[Sun Jan  1 04:32:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 04:33:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 04:33:02 2012] Setting source spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jan  1 04:33:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jan  1 04:54:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 04:54:07 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:59 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:57:00 2012] Error reading totcts from fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jan  1 04:57:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:57:00 2012] Using photon index=1.80, rate=0.00208, arf fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src7.arf
[Sun Jan  1 04:57:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:57:00 2012] Updating source flux to 4.4e-14
[Sun Jan  1 04:58:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting