[Thu Dec 29 20:24:16 2011] Detection parameters:
  Position = (206.2, 303.6) = 11 48 13.47 -60 15 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.4 +/- 15.4
  Background counts = 53.3
  Rate = 0.004 +/- 0.0005

[Thu Dec 29 20:24:16 2011] Off-axis axis estimate = 6.70'
[Fri Dec 30 01:28:13 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 01:28:13 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Dec 30 01:28:13 2011] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.960
[Fri Dec 30 01:28:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.78"
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 02:56:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 30 02:56:04 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 30 02:56:32 2011] Source 18 is offset by -8.669503 and -1.093097 pixels which is larger than
2 X fitted extent = 1.123986 x 1.123986, not incorporating fit results
[Fri Dec 30 02:56:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:32 2011] Assessing source extent using major
[Fri Dec 30 02:56:32 2011] Source does appear to be extended
[Fri Dec 30 02:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 07:07:26 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:07:26 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Dec 30 07:07:26 2011] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.960
[Fri Dec 30 07:07:26 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.78"
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 30 08:02:55 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 30 08:02:55 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 30 08:03:21 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.875525 pixels away
[Fri Dec 30 08:03:21 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:21 2011] Assessing source extent using major
[Fri Dec 30 08:03:21 2011] Source does appear to be extended
[Fri Dec 30 08:03:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:20:57 2012] XMMSAS src. selection expression = ellipse(17893.439270, 26362.791565, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing source region out to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18_src.reg
[Sun Jan  1 04:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (169, 266) - (244, 341)
[Sun Jan  1 04:20:57 2012] XMMSAS bgd. selection expression = annulus(17893.439270, 26362.791565, 1087.500000, 2175.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18.gif
[Sun Jan  1 04:27:30 2012] Mean detx,y = (7036.88, 3911.46) 
[Sun Jan  1 04:27:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 04:28:05 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 04:28:05 2012] Setting source spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jan  1 04:28:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jan  1 04:53:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 04:53:24 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:59 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:59 2012] Error reading totcts from fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jan  1 04:57:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:57:00 2012] Using photon index=1.80, rate=0.00366, arf fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src18.arf
[Sun Jan  1 04:57:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:57:00 2012] Updating source flux to 9.4e-14
[Sun Jan  1 04:58:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting