[Thu Dec 29 20:24:16 2011] Detection parameters:
  Position = (285.0, 316.1) = 11 47 27.42 -60 15 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.9 +/- 20.1
  Background counts = 66.9
  Rate = 0.002 +/- 0.0003

[Thu Dec 29 20:24:16 2011] Off-axis axis estimate = 1.61'
[Fri Dec 30 01:28:13 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 01:28:13 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Dec 30 01:28:13 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Fri Dec 30 01:28:13 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.23"
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8.csv
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8.csv
[Fri Dec 30 02:56:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Dec 30 02:56:04 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Dec 30 02:56:32 2011] Source 17 is offset by -5.674677 and -5.621914 pixels which is larger than
2 X fitted extent = 3.330179 x 3.330179, not incorporating fit results
[Fri Dec 30 02:56:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:32 2011] Assessing source extent using major
[Fri Dec 30 02:56:32 2011] Source does appear to be extended
[Fri Dec 30 02:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 07:07:26 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:07:26 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Dec 30 07:07:26 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Fri Dec 30 07:07:26 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 7.23"
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src8.ximg exists
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Dec 30 08:02:55 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Dec 30 08:02:55 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Dec 30 08:03:21 2011] Source 17 is offset by -5.674677 and -5.609523 pixels which is larger than
2 X fitted extent = 3.416281 x 3.416281, not incorporating fit results
[Fri Dec 30 08:03:21 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:21 2011] Assessing source extent using major
[Fri Dec 30 08:03:21 2011] Source does appear to be extended
[Fri Dec 30 08:03:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:20:57 2012] XMMSAS src. selection expression = ellipse(24744.567139, 27455.179474, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing source region out to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17_src.reg
[Sun Jan  1 04:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (247, 279) - (322, 354)
[Sun Jan  1 04:20:57 2012] XMMSAS bgd. selection expression = annulus(24744.567139, 27455.179474, 1087.500000, 2175.000000, X, Y) && !ellipse(25819.245800, 28164.073600, 1315.672838, 1315.672838, 0.000000, X, Y) && !ellipse(25987.585800, 28899.792000, 1263.416036, 221.470406, 103.896400, X, Y) && !ellipse(27049.113983, 27836.680634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.435181, 29432.201904, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17.gif
[Sun Jan  1 04:31:29 2012] Mean detx,y = (1001.37, 272.12) 
[Sun Jan  1 04:31:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 04:31:49 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 04:31:50 2012] Setting source spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jan  1 04:31:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jan  1 04:53:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 04:53:55 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:59 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:59 2012] Error reading totcts from fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jan  1 04:57:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:57:00 2012] Using photon index=1.80, rate=0.00222, arf fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src17.arf
[Sun Jan  1 04:57:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:57:00 2012] Updating source flux to 2.1e-14
[Sun Jan  1 04:58:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting