[Thu Dec 29 20:24:16 2011] Detection parameters:
  Position = (299.3, 332.5) = 11 47 19.05 -60 13 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.0 +/- 21.1
  Background counts = 67.7
  Rate = 0.002 +/- 0.0004

[Thu Dec 29 20:24:16 2011] Off-axis axis estimate = 2.47'
[Fri Dec 30 01:28:13 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 01:28:13 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Dec 30 01:28:13 2011] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.733
[Fri Dec 30 01:28:13 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.66"
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13.csv
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Dec 30 02:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13.csv
[Fri Dec 30 02:56:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Dec 30 02:56:04 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Dec 30 02:56:04 2011] Fit fullrun_mos2_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Dec 30 02:56:32 2011] Source 15 is offset by 2.043009 and 6.527615 pixels which is larger than
2 X fitted extent = 2.182671 x 2.182671, not incorporating fit results
[Fri Dec 30 02:56:32 2011] Source 15 is offset by -4.995009 and 6.338512 pixels which is larger than
2 X fitted extent = 2.957917 x 2.957917, not incorporating fit results
[Fri Dec 30 02:56:32 2011] Spatial fit model total counts = 1079.660000, observed total counts = 1079.000000
[Fri Dec 30 02:56:32 2011] Offset between fit and detection position for source 15 = 0.259715 pixels
[Fri Dec 30 02:56:32 2011] Warning, changing simple spatial fit ID from 13 to 21
[Fri Dec 30 02:56:32 2011] 1033.544000 total counts/ 964.453000 bgd. counts: snr = 2.224749
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.259715 pixels
  Position = (299.3, 332.7) = 11 47 19.03 -60 13 51.8
  Extent = 4.7 (3.1-7.4)", rotation angle = 0
  Source counts = 69.1 +/- 32.1
  Background counts = 964.5
  Rate = 0.001 +/- 0.0005
[Fri Dec 30 02:56:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:32 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 02:56:32 2011] Source does appear to be extended
[Fri Dec 30 02:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 02:56:32 2011] Source is confused with source 12
[Fri Dec 30 07:07:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:07:26 2011] Initial guess for spatial extent in simple fitting = 4.73"
[Fri Dec 30 07:07:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.595
[Fri Dec 30 07:07:26 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 4.73"
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13.csv
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13.csv
[Fri Dec 30 08:02:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Dec 30 08:02:55 2011] fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Dec 30 08:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Dec 30 08:02:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 08:03:21 2011] Warning, spatial fit 13 centroid is now closest to src. 12
[Fri Dec 30 08:03:21 2011] Spatial fit model total counts = 1078.610000, observed total counts = 1079.000000
[Fri Dec 30 08:03:21 2011] Offset between fit and detection position for source 15 = 0.072694 pixels
[Fri Dec 30 08:03:21 2011] Warning, changing simple spatial fit ID from 13 to 19
[Fri Dec 30 08:03:21 2011] 1068.652100 total counts/ 986.216000 bgd. counts: snr = 2.625013
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.072694 pixels
  Position = (299.3, 332.7) = 11 47 19.08 -60 13 51.8
  Extent = 15.8 (15.8-31.6)" x 2.8 (2.0-5.7)", rotation angle = 104 (95-111) degrees
  Source counts = 82.4 +/- 32.7
  Background counts = 986.2
  Rate = 0.001 +/- 0.0006
[Fri Dec 30 08:03:21 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:21 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:03:21 2011] Source does appear to be extended
[Fri Dec 30 08:03:21 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.76
[Fri Dec 30 08:03:21 2011] Source is asymmetric
[Sun Jan  1 04:20:57 2012] XMMSAS src. selection expression = ellipse(25987.585800, 28899.792000, 947.562027, 166.102805, 103.896400, X, Y)
[Sun Jan  1 04:20:57 2012] Writing source region out to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15_src.reg
[Sun Jan  1 04:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (245, 278) - (354, 387)
[Sun Jan  1 04:20:57 2012] XMMSAS bgd. selection expression = annulus(25987.585800, 28899.792000, 1579.270045, 3158.540091, X, Y) && !ellipse(25819.245800, 28164.073600, 1315.672838, 1315.672838, 0.000000, X, Y) && !ellipse(24744.567139, 27455.179474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.113983, 27836.680634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.435181, 29432.201904, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:20:57 2012] Writing fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15.gif
[Sun Jan  1 04:34:04 2012] Mean detx,y = (-562.79, 192.26) 
[Sun Jan  1 04:34:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 04:34:30 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 04:34:30 2012] Setting source spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jan  1 04:34:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jan  1 04:54:20 2012] Not generating rmf since there are only 82 counts
[Sun Jan  1 04:54:20 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:57:00 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:57:00 2012] Error reading totcts from fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jan  1 04:57:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:57:00 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos2_xmm0560191401_pi300-10000_pass1_cl_src15.arf
[Sun Jan  1 04:57:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:57:01 2012] Updating source flux to 1.8e-14
[Sun Jan  1 04:58:22 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Sun Jan  1 04:58:22 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Sun Jan  1 04:58:22 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting