[Thu Dec 29 20:23:20 2011] Detection parameters:
  Position = (354.4, 437.0) = 11 46 46.97 -60 6 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.7 +/- 16.8
  Background counts = 45.6
  Rate = 0.004 +/- 0.0005

[Thu Dec 29 20:23:21 2011] Off-axis axis estimate = 10.83'
[Fri Dec 30 00:15:18 2011] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 00:15:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 00:15:18 2011] Initial guess for spatial extent in simple fitting = 11.85"
[Fri Dec 30 00:15:18 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Fri Dec 30 00:15:18 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.85"
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 01:28:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 30 01:28:12 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 30 02:56:26 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.818552 pixels away
[Fri Dec 30 02:56:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:26 2011] Assessing source extent using major
[Fri Dec 30 02:56:26 2011] Source does appear to be extended
[Fri Dec 30 02:56:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 06:23:34 2011] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 06:23:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 06:23:34 2011] Initial guess for spatial extent in simple fitting = 11.85"
[Fri Dec 30 06:23:34 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Fri Dec 30 06:23:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 11.85"
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 07:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 30 07:07:26 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 30 08:03:15 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.828009 pixels away
[Fri Dec 30 08:03:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:15 2011] Assessing source extent using major
[Fri Dec 30 08:03:15 2011] Source does appear to be extended
[Fri Dec 30 08:03:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 03:32:03 2012] XMMSAS src. selection expression = ellipse(30787.825348, 37968.609619, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 03:32:03 2012] Writing source region out to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5_src.reg
[Sun Jan  1 03:32:03 2012] Extracting stamp from image fullrun_mos1_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (317, 399) - (392, 474)
[Sun Jan  1 03:32:03 2012] XMMSAS bgd. selection expression = annulus(30787.825348, 37968.609619, 1087.500000, 2175.000000, X, Y)
[Sun Jan  1 03:32:03 2012] Writing fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5.gif
[Sun Jan  1 03:40:36 2012] Mean detx,y = (4487.64, 10188.51) 
[Sun Jan  1 03:40:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 03:40:59 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 03:41:00 2012] Setting source spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan  1 03:41:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jan  1 04:04:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 04:04:47 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:57 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:58 2012] Error reading totcts from fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan  1 04:56:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:58 2012] Using photon index=1.80, rate=0.0036, arf fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src5.arf
[Sun Jan  1 04:56:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:58 2012] Updating source flux to 5.9e-14
[Sun Jan  1 04:57:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting