[Thu Dec 29 20:23:20 2011] Detection parameters:
  Position = (235.6, 351.1) = 11 47 56.23 -60 12 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 15.3
  Background counts = 51.8
  Rate = 0.002 +/- 0.0003

[Thu Dec 29 20:23:21 2011] Off-axis axis estimate = 5.94'
[Fri Dec 30 00:15:18 2011] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 00:15:18 2011] Initial guess for spatial extent in simple fitting = 9.40"
[Fri Dec 30 00:15:18 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Fri Dec 30 00:15:18 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.40"
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 01:28:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 30 01:28:12 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 30 02:56:26 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.675236 pixels away
[Fri Dec 30 02:56:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:26 2011] Assessing source extent using major
[Fri Dec 30 02:56:26 2011] Source does appear to be extended
[Fri Dec 30 02:56:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 06:23:34 2011] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 06:23:34 2011] Initial guess for spatial extent in simple fitting = 9.40"
[Fri Dec 30 06:23:34 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Fri Dec 30 06:23:34 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 9.40"
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7.csv
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7.csv
[Fri Dec 30 07:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 30 07:07:26 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 30 08:03:15 2011] Spatial fit model total counts = 511.998000, observed total counts = 512.000000
[Fri Dec 30 08:03:15 2011] Offset between fit and detection position for source 11 = 0.140096 pixels
[Fri Dec 30 08:03:15 2011] 518.401400 total counts/ 460.258000 bgd. counts: snr = 2.710190
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.140096 pixels
  Position = (235.5, 351.0) = 11 47 56.27 -60 12 32.1
  Extent = 4.1 (3.1-5.2)", rotation angle = 0
  Source counts = 58.1 +/- 22.8
  Background counts = 460.3
  Rate = 0.0009 +/- 0.0004
[Fri Dec 30 08:03:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:03:15 2011] Source does appear to be extended
[Fri Dec 30 08:03:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 03:32:03 2012] XMMSAS src. selection expression = ellipse(20443.381600, 30486.893600, 246.392191, 246.392191, 0.000000, X, Y)
[Sun Jan  1 03:32:03 2012] Writing source region out to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11_src.reg
[Sun Jan  1 03:32:03 2012] Extracting stamp from image fullrun_mos1_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (221, 337) - (250, 365)
[Sun Jan  1 03:32:03 2012] XMMSAS bgd. selection expression = annulus(20443.381600, 30486.893600, 410.653651, 821.307302, X, Y)
[Sun Jan  1 03:32:03 2012] Writing fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11.gif
[Sun Jan  1 03:42:58 2012] Mean detx,y = (5624.49, -2517.29) 
[Sun Jan  1 03:43:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 03:43:17 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 03:43:17 2012] Setting source spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jan  1 03:43:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jan  1 04:04:59 2012] Not generating rmf since there are only 58 counts
[Sun Jan  1 04:04:59 2012] rmf not generated due to insufficient counts
[Sun Jan  1 04:56:58 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:58 2012] Error reading totcts from fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jan  1 04:56:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:59 2012] Using photon index=1.80, rate=0.000948, arf fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src11.arf
[Sun Jan  1 04:56:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:59 2012] Updating source flux to 1.8e-14
[Sun Jan  1 04:57:03 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting