[Thu Dec 29 20:23:19 2011] Detection parameters:
  Position = (297.6, 324.1) = 11 47 20.06 -60 14 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22786.6 +/- 179.1
  Background counts = 60.4
  Rate = 0.4 +/- 0.003

[Thu Dec 29 20:23:21 2011] Off-axis axis estimate = 1.86'
[Fri Dec 30 00:15:18 2011] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 00:15:18 2011] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Dec 30 00:15:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.041
[Fri Dec 30 00:15:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 01:28:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 01:28:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 01:28:12 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 01:28:12 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 02:56:26 2011] Spatial fit model total counts = 20175.300000, observed total counts = 20176.000000
[Fri Dec 30 02:56:26 2011] Offset between fit and detection position for source 1 = 0.200975 pixels
[Fri Dec 30 02:56:26 2011] 20241.950000 total counts/ 4679.550000 bgd. counts: snr = 227.496400
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200975 pixels
  Position = (297.4, 324.2) = 11 47 20.16 -60 14 28.7
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 15562.4 +/- 142.3
  Background counts = 4679.6
  Rate = 0.3 +/- 0.002
[Fri Dec 30 02:56:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 02:56:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 02:56:26 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 02:56:26 2011] Source does appear to be extended
[Fri Dec 30 02:56:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 06:23:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 06:23:34 2011] Initial guess for spatial extent in simple fitting = 5.53"
[Fri Dec 30 06:23:34 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.956
[Fri Dec 30 06:23:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 07:07:26 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 07:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 07:07:26 2011] fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 07:07:26 2011] Fit fullrun_mos1_xmm0560191401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 08:03:15 2011] Spatial fit model total counts = 20144.600000, observed total counts = 20176.000000
[Fri Dec 30 08:03:15 2011] Offset between fit and detection position for source 1 = 0.000885 pixels
[Fri Dec 30 08:03:15 2011] 20208.610000 total counts/ 4659.710000 bgd. counts: snr = 227.782432
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000885 pixels
  Position = (297.4, 324.2) = 11 47 20.16 -60 14 28.7
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 15548.9 +/- 142.2
  Background counts = 4659.7
  Rate = 0.3 +/- 0.002
[Fri Dec 30 08:03:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:03:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:03:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:03:15 2011] Source does appear to be extended
[Fri Dec 30 08:03:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:03:15 2011] Source is confused with source 15
[Sun Jan  1 03:32:03 2012] Counts = 15548.900000, rescaling region sizes by 3.000000
[Sun Jan  1 03:32:03 2012] XMMSAS src. selection expression = ellipse(25826.153000, 28161.177000, 997.630229, 997.630229, 0.000000, X, Y)
[Sun Jan  1 03:32:03 2012] Writing source region out to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jan  1 03:32:03 2012] Extracting stamp from image fullrun_mos1_xmm0560191401_pi300-10000_cl_sm2.00.img.gz, (240, 267) - (355, 382)
[Sun Jan  1 03:32:03 2012] XMMSAS bgd. selection expression = annulus(25826.153000, 28161.177000, 4988.151144, 9976.302287, X, Y) && !ellipse(34650.281600, 32958.352400, 453.792013, 453.792013, 0.000000, X, Y) && !ellipse(30787.825348, 37968.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24728.052856, 27526.429840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21859.214963, 34187.141694, 863.146728, 430.571039, 358.146376, X, Y) && !ellipse(20443.381600, 30486.893600, 328.522921, 328.522921, 0.000000, X, Y) && !ellipse(27912.752026, 29521.885563, 314.267121, 274.829407, 54.634063, X, Y) && !ellipse(25707.436000, 28642.550000, 1255.896036, 1255.896036, 0.000000, X, Y) && !ellipse(17874.651308, 26344.539400, 365.143211, 365.143211, 0.000000, X, Y) && !ellipse(26864.294739, 28315.855011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25441.727386, 30042.680756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26276.147339, 29878.923859, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 03:32:03 2012] Writing fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1.gif
[Sun Jan  1 03:32:18 2012] Mean detx,y = (345.83, 34.99) 
[Sun Jan  1 03:32:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 03:40:04 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 03:40:04 2012] Setting source spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 03:40:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jan  1 04:56:57 2012] Updating aperture counts using extracted products
[Sun Jan  1 04:56:57 2012] Error reading totcts from fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 04:56:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:56:58 2012] Using photon index=1.80, rate=0.253, arf fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 04:56:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:56:58 2012] Updating source flux to 2.4e-12
[Sun Jan  1 04:57:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jan  1 04:58:22 2012] Reading fit data from xmm0560191401/analysis//spectral/fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jan  1 04:58:22 2012] Spectral fit parameter nH value = 9.1652e+21
[Sun Jan  1 04:58:22 2012] Spectral fit parameter PhoIndex value = 1.8275
[Sun Jan  1 04:58:22 2012] Failed to get F(0.3-8.0) from xmm0560191401/analysis//spectral/fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 04:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 04:58:22 2012] Using Nh = 9.2e+21, photon index=1.83, rate=0.253, arf fullrun_mos1_xmm0560191401_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 04:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 04:58:22 2012] Updating source flux to 3.7e-12