[Wed Mar  7 20:36:20 2012] Detection parameters:
  Position = (286.3, 236.1) = 15 50 53.67 -54 21 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 14.1
  Background counts = 52.3
  Rate = 0.001 +/- 0.0003

[Wed Mar  7 20:36:20 2012] Off-axis axis estimate = 4.60'
[Thu Mar  8 02:24:22 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 02:24:22 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Thu Mar  8 02:24:22 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Thu Mar  8 02:24:22 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.73"
[Thu Mar  8 05:07:54 2012] fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32.ximg exists
[Thu Mar  8 05:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32.csv
[Thu Mar  8 05:07:54 2012] fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Mar  8 05:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32.csv
[Thu Mar  8 05:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:07:55 2012] fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Mar  8 05:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Mar  8 05:07:55 2012] fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Mar  8 05:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Mar  8 05:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:08:29 2012] Source 54 is offset by 3.457320 and 6.230033 pixels which is larger than
2 X fitted extent = 1.012000 x 1.012000, not incorporating fit results
[Thu Mar  8 05:08:29 2012] Spatial fit model total counts = 775.804000, observed total counts = 665.000000
[Thu Mar  8 05:08:29 2012] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 05:08:29 2012] Source 54 is offset by -0.319531 and -7.661070 pixels which is larger than
2 X fitted extent = 0.997140 x 0.997140, not incorporating fit results
[Thu Mar  8 05:08:29 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:08:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:08:29 2012] Assessing source extent using major
[Thu Mar  8 05:08:29 2012] Source does appear to be extended
[Thu Mar  8 05:08:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:08:29 2012] Deleting source due to low Poisson probability 0.9