[Wed Mar  7 20:35:40 2012] Detection parameters:
  Position = (285.4, 279.0) = 15 50 54.08 -54 18 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101433.1 +/- 373.0
  Background counts = 65.9
  Rate = 2 +/- 0.007

[Wed Mar  7 20:35:42 2012] Off-axis axis estimate = 1.69'
[Thu Mar  8 00:45:09 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:45:09 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Mar  8 00:45:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Thu Mar  8 00:45:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Mar  8 02:24:20 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar  8 02:24:20 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar  8 02:24:20 2012] Fit fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Mar  8 02:24:21 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar  8 02:24:21 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar  8 02:24:21 2012] Fit fullrun_mos1_xmm0560181101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar  8 05:08:19 2012] Spatial fit model total counts = 99555.300000, observed total counts = 101566.000000
[Thu Mar  8 05:08:19 2012] Offset between fit and detection position for source 1 = 0.063044 pixels
[Thu Mar  8 05:08:19 2012] 99777.900000 total counts/ 25600.000000 bgd. counts: snr = 463.611875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.063044 pixels
  Position = (285.5, 279.1) = 15 50 54.07 -54 18 24.0
  Extent = 6.6 (6.5-6.6)", rotation angle = 0
  Source counts = 74177.9 +/- 315.9
  Background counts = 25600.0
  Rate = 1 +/- 0.005
[Thu Mar  8 05:08:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:08:19 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:08:19 2012] Source does appear to be extended
[Thu Mar  8 05:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 08:52:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 08:52:28 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Thu Mar  8 08:52:28 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992
[Thu Mar  8 08:52:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.56"
[Thu Mar  8 09:38:25 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar  8 09:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 09:38:25 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar  8 09:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 09:38:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:38:25 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar  8 09:38:25 2012] fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar  8 09:38:25 2012] Fit fullrun_mos1_xmm0560181101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar  8 12:34:03 2012] Spatial fit model total counts = 99560.400000, observed total counts = 101566.000000
[Thu Mar  8 12:34:03 2012] Offset between fit and detection position for source 1 = 0.000084 pixels
[Thu Mar  8 12:34:03 2012] 99783.100000 total counts/ 25600.000000 bgd. counts: snr = 463.644375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000084 pixels
  Position = (285.5, 279.1) = 15 50 54.07 -54 18 24.0
  Extent = 6.6 (6.5-6.6)", rotation angle = 0
  Source counts = 74183.1 +/- 315.9
  Background counts = 25600.0
  Rate = 1 +/- 0.005
[Thu Mar  8 12:34:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 12:34:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 12:34:03 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 12:34:03 2012] Source does appear to be extended
[Thu Mar  8 12:34:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 12:34:03 2012] Source is confused with source 27
[Thu Mar  8 17:30:17 2012] Counts = 74183.100000, rescaling region sizes by 3.000000
[Thu Mar  8 17:30:17 2012] XMMSAS src. selection expression = ellipse(24787.007000, 24232.300800, 1180.580434, 1180.580434, 0.000000, X, Y)
[Thu Mar  8 17:30:17 2012] Writing source region out to fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar  8 17:30:17 2012] Extracting stamp from image fullrun_mos1_xmm0560181101_pi300-10000_cl_sm2.00.img.gz, (218, 211) - (353, 347)
[Thu Mar  8 17:30:17 2012] XMMSAS bgd. selection expression = annulus(24787.007000, 24232.300800, 5902.902170, 11805.804340, X, Y) && !ellipse(14842.733612, 26473.426636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35759.981018, 26501.790314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28162.643890, 22990.129089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.392000, 23074.532000, 1271.192037, 658.721619, 166.180000, X, Y) && !ellipse(20987.449783, 19890.176620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.077393, 22361.896057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.484000, 22653.770000, 2542.384073, 2542.384073, 0.000000, X, Y) && !ellipse(26733.188000, 27516.901400, 1153.600033, 1153.600033, 0.000000, X, Y) && !ellipse(25435.264000, 21848.902000, 1271.192037, 1271.192037, 0.000000, X, Y)
[Thu Mar  8 17:30:17 2012] Writing fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1.gif
[Thu Mar  8 17:30:29 2012] Mean detx,y = (259.07, -211.75) 
[Thu Mar  8 17:30:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 17:36:16 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 17:36:16 2012] Setting source spectrum file to fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 17:36:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar  8 19:29:32 2012] Updating aperture counts using extracted products
[Thu Mar  8 19:29:32 2012] Error reading totcts from fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 19:29:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 19:29:32 2012] Using photon index=1.80, rate=1.28, arf fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1.arf
[Thu Mar  8 19:29:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 19:29:32 2012] Updating source flux to 1.4e-11
[Thu Mar  8 19:29:36 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Mar  8 19:32:12 2012] Reading fit data from xmm0560181101/analysis//spectral/fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar  8 19:32:12 2012] Spectral fit parameter nH value = 3.98288e+22
[Thu Mar  8 19:32:12 2012] Spectral fit parameter PhoIndex value = 2.69802
[Thu Mar  8 19:32:12 2012] Failed to get F(0.3-8.0) from xmm0560181101/analysis//spectral/fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar  8 19:32:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 19:32:12 2012] Using Nh = 4e+22, photon index=2.70, rate=1.28, arf fullrun_mos1_xmm0560181101_pi300-10000_pass1_cl_src1.arf
[Thu Mar  8 19:32:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 19:32:12 2012] Updating source flux to 2.4e-11