[Sun Feb 19 05:55:23 2012] Detection parameters:
  Position = (400.7, 419.0) = 1 9 55.32 -45 55 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1402.4 +/- 46.1
  Background counts = 57.7
  Rate = 0.03 +/- 0.0009

[Sun Feb 19 05:55:23 2012] Off-axis axis estimate = 11.46'
[Sun Feb 19 07:04:18 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 07:04:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 07:04:18 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sun Feb 19 07:04:18 2012] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.898
[Sun Feb 19 07:04:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.16"
[Sun Feb 19 08:04:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb 19 08:04:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3.csv
[Sun Feb 19 08:04:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb 19 08:04:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3.csv
[Sun Feb 19 08:04:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 08:04:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 19 08:04:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 19 08:04:39 2012] Fit fullrun_mos2_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 19 08:04:54 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Sun Feb 19 08:04:54 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 08:04:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 08:04:54 2012] Assessing source extent using major
[Sun Feb 19 08:04:54 2012] Source does appear to be extended
[Sun Feb 19 08:04:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 09:16:57 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:16:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 09:16:57 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sun Feb 19 09:16:57 2012] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.898
[Sun Feb 19 09:16:57 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.16"
[Sun Feb 19 10:29:38 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3.ximg exists
[Sun Feb 19 10:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3.csv
[Sun Feb 19 10:29:38 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Feb 19 10:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3.csv
[Sun Feb 19 10:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 10:29:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 19 10:29:39 2012] fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 19 10:29:39 2012] Fit fullrun_mos2_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 19 10:30:06 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Sun Feb 19 10:30:06 2012] Spatial fit model total counts = 4027.000000, observed total counts = 4026.000000
[Sun Feb 19 10:30:06 2012] Offset between fit and detection position for source 7 = 0.270481 pixels
[Sun Feb 19 10:30:06 2012] Warning, changing simple spatial fit ID from 3 to 32
[Sun Feb 19 10:30:06 2012] 4001.070000 total counts/ 2863.300000 bgd. counts: snr = 21.262829
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.270481 pixels
  Position = (400.5, 419.0) = 1 9 55.44 -45 55 51.4
  Extent = 9.9 (9.1-10.5)", rotation angle = 42 (37-47) degrees
  Source counts = 1137.8 +/- 63.3
  Background counts = 2863.3
  Rate = 0.02 +/- 0.001
[Sun Feb 19 10:30:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 10:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 10:30:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 10:30:06 2012] Source does appear to be extended
[Sun Feb 19 10:30:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Sun Feb 19 12:05:21 2012] Counts = 1137.770000, rescaling region sizes by 2.000000
[Sun Feb 19 12:05:21 2012] XMMSAS src. selection expression = ellipse(34792.672000, 36405.540000, 1184.510434, 749.658022, 41.839000, X, Y)
[Sun Feb 19 12:05:21 2012] Writing source region out to fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7_src.reg
[Sun Feb 19 12:05:21 2012] Extracting stamp from image fullrun_mos2_xmm0560180901_pi300-10000_cl_sm2.00.img.gz, (332, 351) - (469, 487)
[Sun Feb 19 12:05:21 2012] XMMSAS bgd. selection expression = annulus(34792.672000, 36405.540000, 3948.368114, 7896.736227, X, Y) && !ellipse(29120.341400, 30132.876020, 357.332010, 357.332010, 0.000000, X, Y) && !ellipse(36144.952301, 28378.805756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29449.164260, 35254.702000, 340.674410, 340.674410, 0.000000, X, Y) && !ellipse(36025.822000, 37551.732000, 1999.088058, 1999.088058, 24.890400, X, Y) && !ellipse(27252.345856, 39139.634186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43394.618652, 32308.891632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29513.305084, 41933.317078, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 12:05:21 2012] Writing fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7.gif
[Sun Feb 19 12:07:12 2012] Mean detx,y = (2649.84, 12031.86) 
[Sun Feb 19 12:07:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 12:09:35 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 12:09:35 2012] Setting source spectrum file to fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 12:09:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Feb 19 13:18:16 2012] Updating aperture counts using extracted products
[Sun Feb 19 13:18:16 2012] Error reading totcts from fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 13:18:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:18:19 2012] Using photon index=1.80, rate=0.0225, arf fullrun_mos2_xmm0560180901_pi300-10000_pass1_cl_src7.arf
[Sun Feb 19 13:18:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:18:19 2012] Updating source flux to 5.1e-13