[Sun Feb 19 05:54:51 2012] Detection parameters:
  Position = (321.9, 301.8) = 1 10 28.17 -46 4 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2547.2 +/- 61.1
  Background counts = 25.5
  Rate = 0.05 +/- 0.001

[Sun Feb 19 05:54:52 2012] Off-axis axis estimate = 1.72'
[Sun Feb 19 06:08:51 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 06:08:51 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Feb 19 06:08:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sun Feb 19 06:08:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Feb 19 07:04:18 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 07:04:18 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 07:04:18 2012] Fit fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Feb 19 07:04:18 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 07:04:18 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 07:04:18 2012] Fit fullrun_mos1_xmm0560180901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 08:04:48 2012] Spatial fit model total counts = 2409.800000, observed total counts = 2410.000000
[Sun Feb 19 08:04:48 2012] Offset between fit and detection position for source 3 = 0.200029 pixels
[Sun Feb 19 08:04:48 2012] 2404.918000 total counts/ 685.828000 bgd. counts: snr = 65.643391
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.200029 pixels
  Position = (321.8, 301.6) = 1 10 28.23 -46 4 22.6
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 1719.1 +/- 49.0
  Background counts = 685.8
  Rate = 0.03 +/- 0.001
[Sun Feb 19 08:04:48 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 08:04:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 08:04:48 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 08:04:48 2012] Source does appear to be extended
[Sun Feb 19 08:04:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 08:09:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 08:09:03 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Sun Feb 19 08:09:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.756
[Sun Feb 19 08:09:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Sun Feb 19 09:16:56 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 09:16:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 09:16:56 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 09:16:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 09:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 09:16:56 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 09:16:56 2012] fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 09:16:56 2012] Fit fullrun_mos1_xmm0560180901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 10:29:54 2012] Spatial fit model total counts = 2395.980000, observed total counts = 2397.000000
[Sun Feb 19 10:29:54 2012] Offset between fit and detection position for source 3 = 0.016070 pixels
[Sun Feb 19 10:29:54 2012] 2412.278000 total counts/ 695.048000 bgd. counts: snr = 65.135997
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.016070 pixels
  Position = (321.8, 301.6) = 1 10 28.23 -46 4 22.6
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 1717.2 +/- 49.1
  Background counts = 695.0
  Rate = 0.03 +/- 0.001
[Sun Feb 19 10:29:54 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 10:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 10:29:54 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 10:29:54 2012] Source does appear to be extended
[Sun Feb 19 10:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:01:49 2012] Counts = 1717.230000, rescaling region sizes by 2.000000
[Sun Feb 19 11:01:49 2012] XMMSAS src. selection expression = ellipse(27944.470000, 26190.765800, 639.186018, 639.186018, 0.000000, X, Y)
[Sun Feb 19 11:01:49 2012] Writing source region out to fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_src.reg
[Sun Feb 19 11:01:49 2012] Extracting stamp from image fullrun_mos1_xmm0560180901_pi300-10000_cl_sm2.00.img.gz, (285, 265) - (358, 338)
[Sun Feb 19 11:01:49 2012] XMMSAS bgd. selection expression = annulus(27944.470000, 26190.765800, 2130.620061, 4261.240123, X, Y) && !ellipse(24859.836400, 26251.450400, 385.009611, 385.009611, 0.000000, X, Y) && !ellipse(30165.351200, 26581.123200, 333.085610, 333.085610, 0.000000, X, Y) && !ellipse(23117.368713, 31000.222382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30212.312400, 25272.149200, 484.172014, 484.172014, 0.000000, X, Y)
[Sun Feb 19 11:01:49 2012] Writing fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3.gif
[Sun Feb 19 11:01:56 2012] Mean detx,y = (242.63, -157.85) 
[Sun Feb 19 11:01:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 11:02:21 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 11:02:22 2012] Setting source spectrum file to fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Feb 19 11:02:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Feb 19 13:18:11 2012] Updating aperture counts using extracted products
[Sun Feb 19 13:18:11 2012] Error reading totcts from fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Feb 19 13:18:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:18:14 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3.arf
[Sun Feb 19 13:18:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:18:14 2012] Updating source flux to 3.2e-13
[Sun Feb 19 13:20:23 2012] Reading fit data from xmm0560180901/analysis//spectral/fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_pl.csv
[Sun Feb 19 13:20:23 2012] Spectral fit parameter nH value = 1.47959e+21
[Sun Feb 19 13:20:23 2012] Spectral fit parameter PhoIndex value = 4.27202
[Sun Feb 19 13:20:23 2012] Failed to get F(0.3-8.0) from xmm0560180901/analysis//spectral/fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Feb 19 13:20:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:20:23 2012] Using Nh = 1.5e+21, photon index=4.27, rate=0.0339, arf fullrun_mos1_xmm0560180901_pi300-10000_pass1_cl_src3.arf
[Sun Feb 19 13:20:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:20:23 2012] Updating source flux to 2.1e-13