[Mon Feb 13 17:08:51 2012] Detection parameters:
  Position = (292.8, 275.1) = 10 23 47.90 0 38 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1168.6 +/- 40.9
  Background counts = 13.5
  Rate = 0.04 +/- 0.001

[Mon Feb 13 17:08:52 2012] Off-axis axis estimate = 1.74'
[Mon Feb 13 17:37:51 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 17:37:51 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Feb 13 17:37:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Mon Feb 13 17:37:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Mon Feb 13 18:08:52 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 18:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 18:08:52 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 18:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 18:08:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 18:08:53 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 18:08:53 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 18:08:53 2012] Fit fullrun_mos2_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 18:09:02 2012] Spatial fit model total counts = 1166.430000, observed total counts = 1163.000000
[Mon Feb 13 18:09:02 2012] Offset between fit and detection position for source 2 = 0.083008 pixels
[Mon Feb 13 18:09:02 2012] 1169.102000 total counts/ 373.393000 bgd. counts: snr = 41.178563
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.083008 pixels
  Position = (292.9, 275.1) = 10 23 47.88 0 38 39.4
  Extent = 5.1 (4.7-5.3)", rotation angle = 0
  Source counts = 795.7 +/- 34.2
  Background counts = 373.4
  Rate = 0.02 +/- 0.001
[Mon Feb 13 18:09:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 18:09:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 18:09:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 18:09:02 2012] Source does appear to be extended
[Mon Feb 13 18:09:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 18:35:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 18:35:55 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Mon Feb 13 18:35:55 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.448
[Mon Feb 13 18:35:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Mon Feb 13 19:07:35 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 19:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 19:07:35 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 19:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 19:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 19:07:35 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 19:07:35 2012] fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 19:07:35 2012] Fit fullrun_mos2_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 19:07:43 2012] Spatial fit model total counts = 1163.590000, observed total counts = 1163.000000
[Mon Feb 13 19:07:43 2012] Offset between fit and detection position for source 2 = 0.009569 pixels
[Mon Feb 13 19:07:43 2012] 1165.052000 total counts/ 369.570000 bgd. counts: snr = 41.379192
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.009569 pixels
  Position = (292.9, 275.1) = 10 23 47.88 0 38 39.4
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 795.5 +/- 34.1
  Background counts = 369.6
  Rate = 0.02 +/- 0.001
[Mon Feb 13 19:07:43 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 19:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 19:07:43 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 19:07:43 2012] Source does appear to be extended
[Mon Feb 13 19:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 19:32:17 2012] XMMSAS src. selection expression = ellipse(25431.596160, 23888.269400, 300.811809, 300.811809, 0.000000, X, Y)
[Mon Feb 13 19:32:17 2012] Writing source region out to fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 13 19:32:17 2012] Extracting stamp from image fullrun_mos2_xmm0560180801_pi300-10000_cl_sm2.00.img.gz, (276, 258) - (310, 292)
[Mon Feb 13 19:32:17 2012] XMMSAS bgd. selection expression = annulus(25431.596160, 23888.269400, 501.353014, 1002.706029, X, Y) && !ellipse(25670.749000, 22880.999400, 428.260012, 428.260012, 0.000000, X, Y)
[Mon Feb 13 19:32:17 2012] Writing fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2.gif
[Mon Feb 13 19:32:20 2012] Mean detx,y = (16.33, 93.87) 
[Mon Feb 13 19:32:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 19:32:28 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 19:32:28 2012] Setting source spectrum file to fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 19:32:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 13 19:56:49 2012] Updating aperture counts using extracted products
[Mon Feb 13 19:56:49 2012] Error reading totcts from fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 19:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 19:56:50 2012] Using photon index=1.80, rate=0.0232, arf fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 13 19:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 19:56:50 2012] Updating source flux to 3e-13
[Mon Feb 13 19:57:58 2012] Reading fit data from xmm0560180801/analysis//spectral/fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_pl.csv
[Mon Feb 13 19:57:58 2012] Spectral fit parameter nH value = 3.08932e+13
[Mon Feb 13 19:57:58 2012] Spectral fit parameter PhoIndex value = 1.23545
[Mon Feb 13 19:57:58 2012] Failed to get F(0.3-8.0) from xmm0560180801/analysis//spectral/fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 19:57:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 19:57:58 2012] Using Nh = 3.1e+13, photon index=1.24, rate=0.0232, arf fullrun_mos2_xmm0560180801_pi300-10000_pass1_cl_src2.arf
[Mon Feb 13 19:57:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 19:57:58 2012] Updating source flux to 4e-13