[Mon Feb 13 17:08:31 2012] Detection parameters:
  Position = (192.4, 227.8) = 10 24 17.02 0 35 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.3 +/- 16.9
  Background counts = 13.8
  Rate = 0.008 +/- 0.0007

[Mon Feb 13 17:08:31 2012] Off-axis axis estimate = 9.24'
[Mon Feb 13 17:09:30 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 17:09:30 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Mon Feb 13 17:09:30 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Mon Feb 13 17:09:30 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.05"
[Mon Feb 13 17:37:50 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12.ximg exists
[Mon Feb 13 17:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12.csv
[Mon Feb 13 17:37:50 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Feb 13 17:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12.csv
[Mon Feb 13 17:37:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 17:37:51 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Feb 13 17:37:51 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Feb 13 17:37:51 2012] Fit fullrun_mos1_xmm0560180801_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Feb 13 18:08:58 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.826469 pixels away
[Mon Feb 13 18:08:58 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 18:08:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 18:08:58 2012] Assessing source extent using major
[Mon Feb 13 18:08:58 2012] Source does appear to be extended
[Mon Feb 13 18:08:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 18:09:08 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 18:09:08 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Mon Feb 13 18:09:08 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Mon Feb 13 18:09:08 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.05"
[Mon Feb 13 18:35:54 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11.ximg exists
[Mon Feb 13 18:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11.csv
[Mon Feb 13 18:35:54 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Feb 13 18:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11.csv
[Mon Feb 13 18:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 18:35:55 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Feb 13 18:35:55 2012] fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Feb 13 18:35:55 2012] Fit fullrun_mos1_xmm0560180801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Feb 13 19:07:40 2012] Spatial fit model total counts = 255.289000, observed total counts = 256.000000
[Mon Feb 13 19:07:40 2012] Offset between fit and detection position for source 12 = 0.164652 pixels
[Mon Feb 13 19:07:40 2012] 255.018000 total counts/ 140.241000 bgd. counts: snr = 9.692088
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.164652 pixels
  Position = (192.6, 227.7) = 10 24 16.97 0 35 13.1
  Extent = 4.6 (3.9-5.5)", rotation angle = 0
  Source counts = 114.8 +/- 16.0
  Background counts = 140.2
  Rate = 0.003 +/- 0.0005
[Mon Feb 13 19:07:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 19:07:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 19:07:40 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 19:07:40 2012] Source does appear to be extended
[Mon Feb 13 19:07:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 19:07:49 2012] XMMSAS src. selection expression = ellipse(16705.398200, 19762.164400, 277.972808, 277.972808, 0.000000, X, Y)
[Mon Feb 13 19:07:49 2012] Writing source region out to fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12_src.reg
[Mon Feb 13 19:07:49 2012] Extracting stamp from image fullrun_mos1_xmm0560180801_pi300-10000_cl_sm2.00.img.gz, (177, 212) - (209, 244)
[Mon Feb 13 19:07:49 2012] XMMSAS bgd. selection expression = annulus(16705.398200, 19762.164400, 463.288013, 926.576027, X, Y)
[Mon Feb 13 19:07:49 2012] Writing fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12.gif
[Mon Feb 13 19:10:27 2012] Mean detx,y = (1008.70, 9438.76) 
[Mon Feb 13 19:10:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 19:10:37 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 19:10:37 2012] Setting source spectrum file to fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 13 19:10:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Feb 13 19:56:49 2012] Updating aperture counts using extracted products
[Mon Feb 13 19:56:49 2012] Error reading totcts from fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 13 19:56:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 19:56:49 2012] Using photon index=1.80, rate=0.00335, arf fullrun_mos1_xmm0560180801_pi300-10000_pass1_cl_src12.arf
[Mon Feb 13 19:56:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 19:56:49 2012] Updating source flux to 6.6e-14