[Mon Mar 19 12:23:04 2012] Detection parameters:
  Position = (289.6, 275.0) = 7 48 34.14 -67 45 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16195.3 +/- 151.5
  Background counts = 35.6
  Rate = 0.7 +/- 0.006

[Mon Mar 19 12:23:06 2012] Off-axis axis estimate = 1.81'
[Mon Mar 19 12:27:22 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 12:27:22 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Mar 19 12:27:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Mon Mar 19 12:27:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Mon Mar 19 13:56:02 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 19 13:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 13:56:02 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 19 13:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 13:56:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 13:56:02 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 19 13:56:02 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 19 13:56:02 2012] Fit fullrun_pn_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 19 15:32:29 2012] Spatial fit model total counts = 14614.000000, observed total counts = 14593.000000
[Mon Mar 19 15:32:29 2012] Offset between fit and detection position for source 1 = 0.050936 pixels
[Mon Mar 19 15:32:29 2012] 14644.680000 total counts/ 3232.980000 bgd. counts: snr = 200.700677
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050936 pixels
  Position = (289.6, 275.0) = 7 48 34.19 -67 45 8.3
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 11411.7 +/- 121.0
  Background counts = 3233.0
  Rate = 0.4 +/- 0.004
[Mon Mar 19 15:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 15:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 15:32:29 2012] Assessing source extent using major axis lower bound
[Mon Mar 19 15:32:29 2012] Source does appear to be extended
[Mon Mar 19 15:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 15:33:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 19 15:33:00 2012] Initial guess for spatial extent in simple fitting = 5.70"
[Mon Mar 19 15:33:00 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.914
[Mon Mar 19 15:33:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.70"
[Mon Mar 19 16:50:15 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 19 16:50:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1.csv
[Mon Mar 19 16:50:15 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 19 16:50:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1.csv
[Mon Mar 19 16:50:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 16:50:15 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 19 16:50:15 2012] fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 19 16:50:15 2012] Fit fullrun_pn_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 19 18:21:57 2012] Warning, spatial fit 1 centroid is now closest to src. 39
[Mon Mar 19 18:21:57 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 18:21:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 18:21:57 2012] Assessing source extent using major axis lower bound
[Mon Mar 19 18:21:57 2012] Source does appear to be extended
[Mon Mar 19 18:21:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 18:22:27 2012] Counts = 11411.700000, rescaling region sizes by 3.000000
[Mon Mar 19 18:22:27 2012] XMMSAS src. selection expression = ellipse(25143.588800, 23879.618000, 1026.711030, 1026.711030, 0.000000, X, Y)
[Mon Mar 19 18:22:27 2012] Writing source region out to fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 19 18:22:27 2012] Extracting stamp from image fullrun_pn_xmm0560180701_pi300-10000_cl_sm2.00.img.gz, (231, 216) - (349, 334)
[Mon Mar 19 18:22:27 2012] XMMSAS bgd. selection expression = annulus(25143.588800, 23879.618000, 5133.555148, 10267.110295, X, Y) && !ellipse(35325.854200, 24401.643000, 436.740013, 436.740013, 0.000000, X, Y) && !ellipse(24662.306366, 16044.875122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.457200, 31386.352600, 450.612013, 450.612013, 0.000000, X, Y) && !ellipse(31343.832607, 33735.325441, 546.432072, 371.705024, 35.654998, X, Y) && !ellipse(35166.855438, 28495.242065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.123627, 17184.014114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25428.107820, 33528.932895, 1550.704045, 462.681160, 81.643090, X, Y) && !ellipse(26381.105957, 30477.715271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.116821, 26488.751465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17823.699615, 23195.503571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.780823, 16123.234329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19786.915894, 18309.859375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28155.541687, 16825.763046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25219.405853, 30456.559998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18631.844070, 26896.221466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21807.830300, 14781.313200, 537.792015, 537.792015, 0.000000, X, Y) && !ellipse(27372.934631, 24265.599854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23800.004180, 24269.984400, 406.920012, 406.920012, 0.000000, X, Y) && !ellipse(16982.101791, 15986.581299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31288.571838, 18171.992996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16542.466110, 17304.750244, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 18:22:27 2012] Writing fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1.gif
[Mon Mar 19 18:22:58 2012] Mean detx,y = (363.24, -168.82) 
[Mon Mar 19 18:23:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 18:27:56 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 18:27:56 2012] Setting source spectrum file to fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 18:27:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 19 20:35:27 2012] Updating aperture counts using extracted products
[Mon Mar 19 20:35:27 2012] Error reading totcts from fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 20:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 20:35:29 2012] Using photon index=1.80, rate=0.409, arf fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 20:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 20:35:29 2012] Updating source flux to 9.7e-13
[Mon Mar 19 20:37:13 2012] Reading fit data from xmm0560180701/analysis//spectral/fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 19 20:37:13 2012] Spectral fit parameter nH value = 4.16763e+21
[Mon Mar 19 20:37:13 2012] Spectral fit parameter PhoIndex value = 4.60271
[Mon Mar 19 20:37:13 2012] Failed to get F(0.3-8.0) from xmm0560180701/analysis//spectral/fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 20:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 20:37:13 2012] Using Nh = 4.2e+21, photon index=4.60, rate=0.409, arf fullrun_pn_xmm0560180701_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 20:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 20:37:13 2012] Updating source flux to 6.2e-13