[Mon Mar 19 12:24:29 2012] Detection parameters:
  Position = (309.1, 198.0) = 7 48 19.19 -67 50 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.3 +/- 7.1
  Background counts = 11.7
  Rate = 0.002 +/- 0.0005

[Mon Mar 19 12:24:29 2012] Off-axis axis estimate = 7.32'
[Mon Mar 19 14:38:50 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:38:50 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Mon Mar 19 14:38:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.849
[Mon Mar 19 14:38:50 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.09"
[Mon Mar 19 15:32:15 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_src21.ximg exists
[Mon Mar 19 15:32:15 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Mar 19 15:32:15 2012] Fit fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_src21 appears to have run properly
[Mon Mar 19 15:32:15 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Mar 19 15:32:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Mar 19 15:32:15 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Mar 19 15:32:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Mar 19 15:32:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 15:32:43 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.852654 pixels away
[Mon Mar 19 15:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 15:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 15:32:43 2012] Assessing source extent using major
[Mon Mar 19 15:32:43 2012] Source does appear to be extended
[Mon Mar 19 15:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 17:32:21 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 17:32:21 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Mon Mar 19 17:32:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.849
[Mon Mar 19 17:32:21 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.09"
[Mon Mar 19 18:21:45 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21.ximg exists
[Mon Mar 19 18:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21.csv
[Mon Mar 19 18:21:45 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Mar 19 18:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21.csv
[Mon Mar 19 18:21:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:21:45 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Mar 19 18:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Mar 19 18:21:45 2012] fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Mar 19 18:21:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Mar 19 18:21:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 18:22:10 2012] Source 24 is offset by 4.355664 and 1.337945 pixels which is larger than
2 X fitted extent = 1.256786 x 1.256786, not incorporating fit results
[Mon Mar 19 18:22:10 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 15.045896 pixels away
[Mon Mar 19 18:22:10 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 18:22:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 18:22:10 2012] Assessing source extent using major
[Mon Mar 19 18:22:10 2012] Source does appear to be extended
[Mon Mar 19 18:22:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 20:09:00 2012] XMMSAS src. selection expression = ellipse(26843.290802, 17177.533188, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 20:09:00 2012] Writing source region out to fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24_src.reg
[Mon Mar 19 20:09:00 2012] Extracting stamp from image fullrun_mos2_xmm0560180701_pi300-10000_cl_sm2.00.img.gz, (272, 161) - (347, 236)
[Mon Mar 19 20:09:00 2012] XMMSAS bgd. selection expression = annulus(26843.290802, 17177.533188, 1087.500000, 2175.000000, X, Y) && !ellipse(26132.013763, 16127.491669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.641449, 16159.059967, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 20:09:00 2012] Writing fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24.gif
[Mon Mar 19 20:16:46 2012] Mean detx,y = (-901.07, 6999.48) 
[Mon Mar 19 20:16:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 20:17:14 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 20:17:15 2012] Setting source spectrum file to fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar 19 20:17:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Mar 19 20:33:52 2012] Not generating rmf since there are only 27 counts
[Mon Mar 19 20:33:52 2012] rmf not generated due to insufficient counts
[Mon Mar 19 20:35:34 2012] Updating aperture counts using extracted products
[Mon Mar 19 20:35:34 2012] Error reading totcts from fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar 19 20:35:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 20:35:36 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0560180701_pi300-10000_pass1_cl_src24.arf
[Mon Mar 19 20:35:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 20:35:36 2012] Updating source flux to 3e-14
[Mon Mar 19 20:36:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting