[Mon Mar 19 12:23:47 2012] Detection parameters:
  Position = (289.6, 275.1) = 7 48 34.13 -67 45 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5247.6 +/- 86.7
  Background counts = 12.5
  Rate = 0.2 +/- 0.003

[Mon Mar 19 12:23:48 2012] Off-axis axis estimate = 1.81'
[Mon Mar 19 13:56:03 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 13:56:03 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Mar 19 13:56:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Mon Mar 19 13:56:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Mon Mar 19 14:38:50 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 19 14:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 14:38:50 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 19 14:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1.csv
[Mon Mar 19 14:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 14:38:50 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 19 14:38:50 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 19 14:38:50 2012] Fit fullrun_mos1_xmm0560180701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 19 15:32:36 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.642795 pixels away
[Mon Mar 19 15:32:36 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 15:32:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 15:32:36 2012] Assessing source extent using major
[Mon Mar 19 15:32:36 2012] Source does appear to be extended
[Mon Mar 19 15:32:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 16:50:16 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 16:50:16 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Mar 19 16:50:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Mon Mar 19 16:50:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.33"
[Mon Mar 19 17:32:21 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 19 17:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1.csv
[Mon Mar 19 17:32:21 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 19 17:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1.csv
[Mon Mar 19 17:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 17:32:21 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 19 17:32:21 2012] fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 19 17:32:21 2012] Fit fullrun_mos1_xmm0560180701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 19 18:22:03 2012] Spatial fit model total counts = 4593.000000, observed total counts = 4593.000000
[Mon Mar 19 18:22:03 2012] Offset between fit and detection position for source 1 = 0.042703 pixels
[Mon Mar 19 18:22:03 2012] 4598.180000 total counts/ 970.250000 bgd. counts: snr = 116.470804
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.042703 pixels
  Position = (289.6, 275.1) = 7 48 34.14 -67 45 7.9
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 3627.9 +/- 67.8
  Background counts = 970.2
  Rate = 0.1 +/- 0.002
[Mon Mar 19 18:22:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 18:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 18:22:03 2012] Assessing source extent using major axis lower bound
[Mon Mar 19 18:22:03 2012] Source does appear to be extended
[Mon Mar 19 18:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 19:46:49 2012] Counts = 3627.930000, rescaling region sizes by 2.000000
[Mon Mar 19 19:46:49 2012] XMMSAS src. selection expression = ellipse(25149.364200, 23886.812600, 659.140819, 659.140819, 0.000000, X, Y)
[Mon Mar 19 19:46:49 2012] Writing source region out to fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 19 19:46:49 2012] Extracting stamp from image fullrun_mos1_xmm0560180701_pi300-10000_cl_sm2.00.img.gz, (252, 237) - (328, 313)
[Mon Mar 19 19:46:49 2012] XMMSAS bgd. selection expression = annulus(25149.364200, 23886.812600, 2197.136063, 4394.272126, X, Y)
[Mon Mar 19 19:46:49 2012] Writing fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1.gif
[Mon Mar 19 19:46:52 2012] Mean detx,y = (242.73, 40.99) 
[Mon Mar 19 19:46:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 19:47:19 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 19:47:19 2012] Setting source spectrum file to fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 19:47:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 19 20:35:31 2012] Updating aperture counts using extracted products
[Mon Mar 19 20:35:31 2012] Error reading totcts from fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 20:35:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 20:35:32 2012] Using photon index=1.80, rate=0.123, arf fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 20:35:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 20:35:33 2012] Updating source flux to 1.2e-12
[Mon Mar 19 20:36:01 2012] Reading fit data from xmm0560180701/analysis//spectral/fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 19 20:36:01 2012] Spectral fit parameter nH value = 4.73401e+21
[Mon Mar 19 20:36:01 2012] Spectral fit parameter PhoIndex value = 4.81247
[Mon Mar 19 20:36:01 2012] Failed to get F(0.3-8.0) from xmm0560180701/analysis//spectral/fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 20:36:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 20:36:01 2012] Using Nh = 4.7e+21, photon index=4.81, rate=0.123, arf fullrun_mos1_xmm0560180701_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 20:36:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 20:36:01 2012] Updating source flux to 7.6e-13