[Tue Feb 21 07:00:14 2012] Detection parameters:
  Position = (309.0, 225.0) = 18 8 28.39 -37 5 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.1 +/- 20.7
  Background counts = 141.7
  Rate = 0.005 +/- 0.0005

[Tue Feb 21 07:00:15 2012] Off-axis axis estimate = 5.38'
[Tue Feb 21 18:26:14 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 18:26:14 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Tue Feb 21 18:26:14 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.113
[Tue Feb 21 18:26:14 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.12"
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17.ximg exists
[Tue Feb 21 21:14:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17.csv
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Feb 21 21:14:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17.csv
[Tue Feb 21 21:14:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Feb 21 21:14:02 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Feb 21 21:14:19 2012] Warning, spatial fit 17 centroid is now closest to src. 41
[Tue Feb 21 21:14:19 2012] Source 39 is offset by 1.120572 and -0.861209 pixels which is larger than
2 X fitted extent = 1.020685 x 1.020685, not incorporating fit results
[Tue Feb 21 21:14:19 2012] Source 39 is offset by -0.563083 and 6.184378 pixels which is larger than
2 X fitted extent = 2.807467 x 2.807467, not incorporating fit results
[Tue Feb 21 21:14:19 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 21:14:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 21:14:19 2012] Assessing source extent using major
[Tue Feb 21 21:14:19 2012] Source does appear to be extended
[Tue Feb 21 21:14:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 21:14:19 2012] Source is confused with source 41
[Wed Feb 22 02:55:09 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 02:55:09 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Wed Feb 22 02:55:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.113
[Wed Feb 22 02:55:09 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 9.12"
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17.csv
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17.csv
[Wed Feb 22 04:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Feb 22 04:36:58 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Feb 22 04:37:09 2012] Spatial fit model total counts = 1866.980000, observed total counts = 1867.000000
[Wed Feb 22 04:37:09 2012] Offset between fit and detection position for source 39 = 0.236230 pixels
[Wed Feb 22 04:37:09 2012] 1772.339000 total counts/ 1669.130000 bgd. counts: snr = 2.526228
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.236230 pixels
  Position = (308.9, 225.2) = 18 8 28.40 -37 5 28.3
  Extent = 6.2 (4.5-8.4)", rotation angle = 0
  Source counts = 103.2 +/- 42.1
  Background counts = 1669.1
  Rate = 0.002 +/- 0.0007
[Wed Feb 22 04:37:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 04:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 04:37:09 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 04:37:09 2012] Source does appear to be extended
[Wed Feb 22 04:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 03:08:50 2012] XMMSAS src. selection expression = ellipse(26829.021400, 19544.668800, 372.778211, 372.778211, 0.000000, X, Y)
[Thu Feb 23 03:08:50 2012] Writing source region out to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39_src.reg
[Thu Feb 23 03:08:50 2012] Extracting stamp from image fullrun_mos2_xmm0560180601_pi300-10000_cl_sm2.00.img.gz, (288, 204) - (330, 247)
[Thu Feb 23 03:08:50 2012] XMMSAS bgd. selection expression = annulus(26829.021400, 19544.668800, 621.297018, 1242.594036, X, Y) && !ellipse(26777.311600, 20352.492000, 903.320026, 903.320026, 0.000000, X, Y) && !ellipse(27460.415192, 20238.617355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27417.204590, 19551.714813, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 03:08:50 2012] Writing fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39.gif
[Thu Feb 23 03:22:25 2012] Mean detx,y = (342.99, -7994.40) 
[Thu Feb 23 03:22:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 03:22:40 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 03:22:41 2012] Setting source spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Feb 23 03:22:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Feb 23 04:44:48 2012] Updating aperture counts using extracted products
[Thu Feb 23 04:44:48 2012] Error reading totcts from fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Feb 23 04:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 04:44:50 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src39.arf
[Thu Feb 23 04:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 04:44:50 2012] Updating source flux to 2.6e-14
[Thu Feb 23 04:46:29 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Thu Feb 23 04:46:29 2012] Flag c found in src. 39 procflags, skipping spectral fitting