[Tue Feb 21 07:00:14 2012] Detection parameters:
  Position = (229.1, 320.8) = 18 8 57.39 -36 58 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.1 +/- 22.0
  Background counts = 179.3
  Rate = 0.003 +/- 0.0005

[Tue Feb 21 07:00:15 2012] Off-axis axis estimate = 5.28'
[Tue Feb 21 18:26:14 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 18:26:14 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Feb 21 18:26:14 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Tue Feb 21 18:26:14 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.07"
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src29.ximg exists
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Feb 21 21:14:01 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src29 appears to have run properly
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Feb 21 21:14:02 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Feb 21 21:14:19 2012] Spatial fit model total counts = 1654.010000, observed total counts = 1665.000000
[Tue Feb 21 21:14:19 2012] Offset between fit and detection position for source 27 = 4.588031 pixels
[Tue Feb 21 21:14:19 2012] 1509.687000 total counts/ 398.417000 bgd. counts: snr = 55.673774
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.588031 pixels
  Position = (230.0, 325.3) = 18 8 57.08 -36 58 13.0
  Extent = 18.1 (18.1-18.1)", rotation angle = 0
  Source counts = 1111.3 +/- 38.9
  Background counts = 398.4
  Rate = 0.02 +/- 0.0006
[Tue Feb 21 21:14:19 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 21:14:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 21:14:19 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 21:14:19 2012] Source does appear to be extended
[Tue Feb 21 21:14:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 02:55:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 02:55:09 2012] Initial guess for spatial extent in simple fitting = 18.14"
[Wed Feb 22 02:55:09 2012] source mask rpix=4.2, npix_max = 87, mask sum = 74, frac = 0.848
[Wed Feb 22 02:55:09 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 18.14"
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28.csv
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28.csv
[Wed Feb 22 04:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Feb 22 04:36:58 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Feb 22 04:37:09 2012] Spatial fit model total counts = 2924.010000, observed total counts = 3179.000000
[Wed Feb 22 04:37:09 2012] Offset between fit and detection position for source 27 = 8.561904 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 8.561904 pixels
  Position = (228.9, 316.8) = 18 8 57.46 -36 58 49.9
  Extent = 32.4 (31.5-34.0)", rotation angle = 0
  Source counts = 2919.7 +/- 54.0
  Background counts = 0.0
  Rate = 0.05 +/- 0.0009
[Wed Feb 22 04:37:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 04:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 04:37:09 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 04:37:09 2012] Source does appear to be extended
[Wed Feb 22 04:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:37:09 2012] Source is confused with source 29
[Thu Feb 23 03:08:50 2012] Counts = 2919.690000, rescaling region sizes by 2.000000
[Thu Feb 23 03:08:50 2012] XMMSAS src. selection expression = ellipse(19867.788200, 27509.678000, 3889.115166, 3889.115166, 0.000000, X, Y)
[Thu Feb 23 03:08:50 2012] Writing source region out to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27_src.reg
[Thu Feb 23 03:08:50 2012] Extracting stamp from image fullrun_mos2_xmm0560180601_pi300-10000_cl_sm2.00.img.gz, (5, 93) - (452, 540)
[Thu Feb 23 03:08:50 2012] XMMSAS bgd. selection expression = annulus(19867.788200, 27509.678000, 12963.717219, 25927.434437, X, Y) && !ellipse(18389.252800, 26086.299000, 360.337610, 360.337610, 0.000000, X, Y) && !ellipse(26923.961212, 40185.952026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26569.986000, 34341.270800, 1381.648040, 1381.648040, 0.000000, X, Y) && !ellipse(26767.019200, 37492.698000, 500.276814, 500.276814, 0.000000, X, Y) && !ellipse(26915.207581, 40668.251373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.857239, 38152.600494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.126740, 39016.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26855.095062, 41270.696106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26958.062408, 36938.840576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.542267, 42159.679565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.457275, 35106.612823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.063080, 39524.228455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26880.676270, 35735.177734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.311600, 20352.492000, 903.320026, 903.320026, 0.000000, X, Y) && !ellipse(20048.168000, 31098.443600, 1561.632045, 1561.632045, 0.000000, X, Y) && !ellipse(26717.929000, 42872.588000, 1113.680032, 1113.680032, 0.000000, X, Y) && !ellipse(26829.021400, 19544.668800, 497.037614, 497.037614, 0.000000, X, Y) && !ellipse(27226.002655, 34588.112152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.287445, 20500.109863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18304.032913, 39093.869446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37367.916200, 26151.474200, 232.992007, 232.992007, 0.000000, X, Y) && !ellipse(27299.865570, 13035.858734, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26768.187988, 44007.781738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.415192, 20238.617355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.684784, 37443.582886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34080.088226, 26132.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27140.675323, 35832.006653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20486.741791, 17865.418091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27417.204590, 19551.714813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.476700, 19575.562600, 544.516016, 544.516016, 0.000000, X, Y) && !ellipse(29126.042511, 20443.097092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34480.294067, 27206.870514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34416.634430, 30812.543671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38950.513794, 26712.671326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28490.508148, 13808.257202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41711.487469, 28746.655116, 640.034418, 640.034418, 0.000000, X, Y) && !ellipse(17117.488373, 30139.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20328.734360, 26918.048462, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 03:08:50 2012] Writing fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27.gif
[Thu Feb 23 03:29:49 2012] Mean detx,y = (8380.63, -19.01) 
[Thu Feb 23 03:29:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 03:39:18 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 03:39:18 2012] Setting source spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Feb 23 03:39:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Feb 23 04:44:49 2012] Updating aperture counts using extracted products
[Thu Feb 23 04:44:49 2012] Error reading totcts from fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Feb 23 04:44:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 04:44:51 2012] Using photon index=1.80, rate=0.0473, arf fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src27.arf
[Thu Feb 23 04:44:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 04:44:51 2012] Updating source flux to 5.9e-13
[Thu Feb 23 04:46:29 2012] Flag c found in src. 27 procflags, skipping spectral fitting