[Tue Feb 21 07:00:14 2012] Detection parameters:
  Position = (480.5, 330.7) = 18 7 26.16 -36 57 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.3 +/- 17.5
  Background counts = 67.7
  Rate = 0.002 +/- 0.0003

[Tue Feb 21 07:00:15 2012] Off-axis axis estimate = 13.40'
[Tue Feb 21 18:26:14 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 18:26:14 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Tue Feb 21 18:26:14 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.848
[Tue Feb 21 18:26:14 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 13.13"
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36.ximg exists
[Tue Feb 21 21:14:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36.csv
[Tue Feb 21 21:14:01 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Feb 21 21:14:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36.csv
[Tue Feb 21 21:14:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Feb 21 21:14:02 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Feb 21 21:14:02 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Tue Feb 21 21:14:19 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 16.946309 pixels away
[Tue Feb 21 21:14:19 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 21:14:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 21:14:19 2012] Assessing source extent using major
[Tue Feb 21 21:14:19 2012] Source does appear to be extended
[Tue Feb 21 21:14:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 02:55:09 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 02:55:09 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Wed Feb 22 02:55:09 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.848
[Wed Feb 22 02:55:09 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 13.13"
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35.csv
[Wed Feb 22 04:36:57 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed Feb 22 04:36:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35.csv
[Wed Feb 22 04:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed Feb 22 04:36:58 2012] fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Feb 22 04:36:58 2012] Fit fullrun_mos2_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Feb 22 04:37:09 2012] Spatial fit model total counts = 773.966000, observed total counts = 774.000000
[Wed Feb 22 04:37:09 2012] Offset between fit and detection position for source 26 = 0.510844 pixels
[Wed Feb 22 04:37:09 2012] 773.525000 total counts/ 651.797000 bgd. counts: snr = 4.767979
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.510844 pixels
  Position = (480.0, 331.0) = 18 7 26.32 -36 57 47.1
  Extent = 8.0 (6.3-10.0)", rotation angle = 0
  Source counts = 121.7 +/- 27.8
  Background counts = 651.8
  Rate = 0.002 +/- 0.0005
[Wed Feb 22 04:37:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 04:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 04:37:09 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 04:37:09 2012] Source does appear to be extended
[Wed Feb 22 04:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 03:08:50 2012] XMMSAS src. selection expression = ellipse(41711.487469, 28746.655116, 480.025814, 480.025814, 0.000000, X, Y)
[Thu Feb 23 03:08:50 2012] Writing source region out to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26_src.reg
[Thu Feb 23 03:08:50 2012] Extracting stamp from image fullrun_mos2_xmm0560180601_pi300-10000_cl_sm2.00.img.gz, (452, 303) - (508, 359)
[Thu Feb 23 03:08:50 2012] XMMSAS bgd. selection expression = annulus(41711.487469, 28746.655116, 800.043023, 1600.086046, X, Y)
[Thu Feb 23 03:08:50 2012] Writing fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26.gif
[Thu Feb 23 03:42:21 2012] Mean detx,y = (-14613.58, 1083.22) 
[Thu Feb 23 03:42:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 03:42:38 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 03:42:39 2012] Setting source spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Feb 23 03:42:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Feb 23 04:44:49 2012] Updating aperture counts using extracted products
[Thu Feb 23 04:44:49 2012] Error reading totcts from fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Feb 23 04:44:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 04:44:51 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos2_xmm0560180601_pi300-10000_pass1_cl_src26.arf
[Thu Feb 23 04:44:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 04:44:51 2012] Updating source flux to 4.8e-14