[Tue Feb 21 06:59:43 2012] Detection parameters:
  Position = (308.0, 306.5) = 18 8 28.75 -36 59 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23914.5 +/- 227.0
  Background counts = 76.0
  Rate = 0.9 +/- 0.008

[Tue Feb 21 06:59:44 2012] Off-axis axis estimate = 0.91'
[Tue Feb 21 07:05:43 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:05:43 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Tue Feb 21 07:05:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.750
[Tue Feb 21 07:05:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.88"
[Tue Feb 21 18:26:13 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3.ximg exists
[Tue Feb 21 18:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 18:26:13 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Feb 21 18:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 18:26:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 18:26:13 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 21 18:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Feb 21 18:26:13 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 21 18:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Feb 21 18:26:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 21:14:09 2012] Source 3 is offset by -1.822195 and -6.808867 pixels which is larger than
2 X fitted extent = 6.328460 x 6.328460, not incorporating fit results
[Tue Feb 21 21:14:10 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 21:14:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 21:14:10 2012] Assessing source extent using major
[Tue Feb 21 21:14:10 2012] Source does appear to be extended
[Tue Feb 21 21:14:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 21:14:10 2012] Source is confused with source 1
[Tue Feb 21 21:14:31 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 21:14:31 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Tue Feb 21 21:14:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.750
[Tue Feb 21 21:14:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.88"
[Wed Feb 22 02:55:09 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 22 02:55:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 02:55:09 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 22 02:55:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 02:55:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 02:55:09 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 02:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Feb 22 02:55:09 2012] fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 02:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Feb 22 02:55:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 04:37:02 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Wed Feb 22 04:37:02 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 04:37:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 04:37:02 2012] Assessing source extent using major
[Wed Feb 22 04:37:02 2012] Source does appear to be extended
[Wed Feb 22 04:37:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:37:16 2012] Counts = 23914.513672, rescaling region sizes by 3.000000
[Wed Feb 22 04:37:16 2012] XMMSAS src. selection expression = ellipse(26746.613220, 26618.704529, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Feb 22 04:37:16 2012] Writing source region out to fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3_src.reg
[Wed Feb 22 04:37:16 2012] Extracting stamp from image fullrun_mos1_xmm0560180601_pi300-10000_cl_sm2.00.img.gz, (195, 194) - (420, 419)
[Wed Feb 22 04:37:16 2012] XMMSAS bgd. selection expression = annulus(26746.613220, 26618.704529, 9787.500000, 19575.000000, X, Y) && !ellipse(27594.905701, 27190.109314, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27032.936000, 27652.586000, 3037.776087, 3037.776087, 0.000000, X, Y) && !ellipse(26830.841370, 40839.137024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.748600, 34360.837000, 1036.344030, 1036.344030, 0.000000, X, Y) && !ellipse(26811.953227, 41924.186650, 1874.632054, 308.520644, 84.102234, X, Y) && !ellipse(26821.203613, 39625.597473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.044800, 38929.470032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26837.510803, 37881.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.538330, 36572.948334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.124359, 26059.905823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.514000, 38414.596000, 1389.904040, 1389.904040, 0.000000, X, Y) && !ellipse(20169.115600, 24317.976200, 812.968023, 812.968023, 0.000000, X, Y) && !ellipse(26876.260956, 36053.592743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.364014, 35445.657410, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 04:37:16 2012] Writing fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3.gif
[Wed Feb 22 05:00:04 2012] Mean detx,y = (262.92, -212.89) 
[Wed Feb 22 05:00:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 05:10:59 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 05:10:59 2012] Setting source spectrum file to fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 05:10:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 23 00:11:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 00:11:49 2012] rmf not generated due to insufficient counts
[Thu Feb 23 04:44:45 2012] Updating aperture counts using extracted products
[Thu Feb 23 04:44:45 2012] Error reading totcts from fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 04:44:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 04:44:46 2012] Using photon index=1.80, rate=0.861, arf fullrun_mos1_xmm0560180601_pi300-10000_pass1_cl_src3.arf
[Thu Feb 23 04:44:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 04:44:46 2012] Updating source flux to 8.9e-12
[Thu Feb 23 04:44:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting