[Fri Mar 16 07:32:07 2012] Detection parameters:
  Position = (314.8, 293.0) = 16 35 47.28 -47 37 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 834.7 +/- 43.3
  Background counts = 209.1
  Rate = 0.008 +/- 0.0004

[Fri Mar 16 07:32:08 2012] Off-axis axis estimate = 1.25'
[Fri Mar 16 07:39:01 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 07:39:01 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Mar 16 07:39:01 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.889
[Fri Mar 16 07:39:01 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.05"
[Fri Mar 16 10:04:13 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Mar 16 10:04:13 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Mar 16 10:04:13 2012] Fit fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src13 appears to have run properly
[Fri Mar 16 10:04:14 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Mar 16 10:04:14 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Mar 16 10:04:14 2012] Fit fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Mar 16 11:43:54 2012] Spatial fit model total counts = 4045.000000, observed total counts = 4045.000000
[Fri Mar 16 11:43:54 2012] Offset between fit and detection position for source 13 = 0.357148 pixels
[Fri Mar 16 11:43:54 2012] 4077.406000 total counts/ 3085.940000 bgd. counts: snr = 17.847775
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.357148 pixels
  Position = (315.0, 292.7) = 16 35 47.19 -47 37 27.3
  Extent = 11.5 (10.1-13.5)", rotation angle = 0
  Source counts = 991.5 +/- 63.9
  Background counts = 3085.9
  Rate = 0.008 +/- 0.0005
[Fri Mar 16 11:43:54 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:43:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:43:54 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 11:43:54 2012] Source does appear to be extended
[Fri Mar 16 11:43:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:43:54 2012] Source is confused with source 37
[Fri Mar 16 11:44:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 11:44:16 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Fri Mar 16 11:44:16 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Fri Mar 16 11:44:16 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.50"
[Fri Mar 16 15:32:23 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13.ximg exists
[Fri Mar 16 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13.csv
[Fri Mar 16 15:32:23 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Mar 16 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13.csv
[Fri Mar 16 15:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 15:32:24 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Mar 16 15:32:24 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Mar 16 15:32:24 2012] Fit fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Mar 16 16:54:34 2012] Warning, spatial fit 13 centroid is now closest to src. 15
[Fri Mar 16 16:54:34 2012] Spatial fit model total counts = 5681.980000, observed total counts = 5682.000000
[Fri Mar 16 16:54:34 2012] Offset between fit and detection position for source 13 = 0.509962 pixels
[Fri Mar 16 16:54:34 2012] Warning, changing simple spatial fit ID from 13 to 34
[Fri Mar 16 16:54:34 2012] 5496.770000 total counts/ 4234.960000 bgd. counts: snr = 19.389620
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.509962 pixels
  Position = (315.3, 293.2) = 16 35 47.07 -47 37 25.5
  Extent = 13.0 (11.8-14.8)", rotation angle = 0
  Source counts = 1261.8 +/- 74.1
  Background counts = 4235.0
  Rate = 0.01 +/- 0.0006
[Fri Mar 16 16:54:34 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 16:54:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 16:54:34 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 16:54:34 2012] Source does appear to be extended
[Fri Mar 16 16:54:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 16:55:00 2012] Counts = 1261.810000, rescaling region sizes by 2.000000
[Fri Mar 16 16:55:00 2012] XMMSAS src. selection expression = ellipse(27386.074000, 25456.608000, 1565.880045, 1565.880045, 0.000000, X, Y)
[Fri Mar 16 16:55:00 2012] Writing source region out to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13_src.reg
[Fri Mar 16 16:55:00 2012] Extracting stamp from image fullrun_pn_xmm0560180401_pi300-10000_cl_sm2.00.img.gz, (225, 203) - (405, 383)
[Fri Mar 16 16:55:00 2012] XMMSAS bgd. selection expression = annulus(27386.074000, 25456.608000, 5219.600150, 10439.200300, X, Y) && !ellipse(26388.368200, 27902.696400, 452.567213, 452.567213, 0.000000, X, Y) && !ellipse(19472.034800, 32682.562600, 426.700012, 426.700012, 0.000000, X, Y) && !ellipse(18458.786606, 31683.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37947.231323, 26911.487885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31622.457703, 24732.754913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.913600, 22869.947000, 433.817612, 433.817612, 0.000000, X, Y) && !ellipse(18695.794000, 21147.823000, 370.085611, 370.085611, 0.000000, X, Y) && !ellipse(19566.847153, 21006.029678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.477631, 17815.288483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35316.994690, 15909.796524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.096802, 35124.082916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37773.184200, 34240.680800, 423.556812, 423.556812, 0.000000, X, Y) && !ellipse(30627.245000, 32746.813000, 612.663218, 612.663218, 0.000000, X, Y) && !ellipse(33202.792206, 31791.625549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21172.393814, 30848.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38308.602000, 30156.898000, 1941.680056, 1941.680056, 0.000000, X, Y) && !ellipse(28434.317108, 29980.627411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16993.609600, 28173.216600, 304.928809, 304.928809, 0.000000, X, Y) && !ellipse(27396.752000, 25814.398000, 1107.632032, 1107.632032, 0.000000, X, Y) && !ellipse(20219.652800, 25312.100800, 307.474409, 307.474409, 0.000000, X, Y) && !ellipse(37811.269928, 22125.088684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23166.214000, 21863.450800, 419.274412, 419.274412, 0.000000, X, Y) && !ellipse(32655.187103, 21744.340225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.363831, 20410.482712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18240.049362, 19428.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33929.595856, 17729.670425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29787.626220, 17014.066800, 470.534414, 470.534414, 0.000000, X, Y) && !ellipse(32917.740295, 16373.492081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.506280, 16380.673400, 750.362422, 750.362422, 0.000000, X, Y) && !ellipse(26215.041840, 14849.327377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.199127, 14404.798477, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 16:55:00 2012] Writing fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13.gif
[Fri Mar 16 17:21:56 2012] Mean detx,y = (216.78, 2281.51) 
[Fri Mar 16 17:22:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 17:27:35 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 17:27:35 2012] Setting source spectrum file to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Mar 16 17:27:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Mar 16 21:11:45 2012] Updating aperture counts using extracted products
[Fri Mar 16 21:11:45 2012] Error reading totcts from fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Mar 16 21:11:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 21:11:48 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src13.arf
[Fri Mar 16 21:11:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 21:11:48 2012] Updating source flux to 3.1e-14
[Fri Mar 16 21:14:50 2012] Flag c found in src. 13 procflags, skipping spectral fitting